#corne — Public Fediverse posts

Bought a prebuilt #corne #keyboard and getting used to it.

It occurs to me that if I’d listened accepting the inevitable and just gone straight to a Corne I would have saved myself much money.

#MechanicalKeyboard #Corne #ErgomechKeyboards

It occurs to me that if I’d listened accepting the inevitable and just gone straight to a Corne I would have saved myself much money.

#MechanicalKeyboard #Corne #ErgomechKeyboards

It occurs to me that if I’d listened accepting the inevitable and just gone straight to a Corne I would have saved myself much money.

#MechanicalKeyboard #Corne #ErgomechKeyboards

It occurs to me that if I’d listened accepting the inevitable and just gone straight to a Corne I would have saved myself much money.

#MechanicalKeyboard #Corne #ErgomechKeyboards

It occurs to me that if I’d listened accepting the inevitable and just gone straight to a Corne I would have saved myself much money.

#MechanicalKeyboard #Corne #ErgomechKeyboards

https://www.europesays.com/nl/128140/ ‘Corné H. is gevaar voor zichzelf en omgeving’, advocaten eisen met voorrang tbs #advocaten #BreakingNews #BreakingNews #Corné #Dutch #FeaturedNews #FeaturedNews #gijzeling #Headlines #Hoofdpunten #KortGeding #LatestNews #LatestNews #Nederland #Nederlanden #Nederlands #Netherlands #News #Nieuws #NL #TopStories #TopStories #Voorpaginanieuws

RE: https://masto.ai/@phoronix/116245026967760291

This keeb is better than most so-called “ergonomic” keyboard, but it’s still ridiculously expensive (280$).
There are a lot of good open-source keebs out there, that you can buy or build for a fraction of that amount: #Quacken, #Corne, #Totem, #Planck, #Atreus…

Wer nannte es eigentlich zmk-nix und nicht corne-flakes?

#zmk #nix #corne #nix_flakes #flakes

@BonfireAtNight you might consider custom #mechanicalkeyboards with #ZMK or #QMK now :)

I've been using CAPsLock for layout switch for ages on my #WASD keyboards; now as I moved to custom mechanical keyboards; #ZSAPlank -> #BlankSlate -> #Corne ; mapped bottom left key(third layer key on first two and shift on corne) to do it on tap as well.
Though as now moving to #homerow, thinking I can utilize that key for something else :)

P.S. check CAPs_Word on ZMK or QMK :)

I've taken the next step on my #AltKeyboardLayout #SplitKeyboard journey where I move from the #Gallium layout to the #Graphite layout. While there is not a huge difference between these two keyboard layouts, the Gallium layout has some punctuation tweaks that might make it easier to type the \( \LaTeX \) code in my lesson handouts.

It was not without some challenges to implement #graphite on my #ZSA #Voyager keyboard though -- I captured some of my journey in this blog article:

https://www.teachmaths.org/20241229_graphite-keyboard-layout/

#ErgoMechKeyboards #Corne #QMK #Vial

C'est donc une addiction !
Mon 6eme clavier. Et mon 3éme Corne...
#splitkeyboard #clavierergo #crkbd #corne #typewriter

@goofy @NuitsDeChine
Si tu es prêt·e à avoir une disposition légèrement différente de #Bépo, #Bépolar est une variante qui a été développée spécifiquement les claviers ergonomiques modernes, qui sont tous *bien meilleurs* que le TMx.

(Disclaimer : j’ai participé à la conception du TMx 2030 USB.)

Là, beaucoup de claviers seront disponibles : #Planck, #Ferris, #Corne… on peut les fabriquer soi-même ou les acheter à vil prix sur AliExpress ou Etsy, entre autres.

https://ergol.org/lafayette/#bépolar

2/n

Je me rends compte que ça fait maintenant des semaines que j'utilise mon clavier #corne avec #ergol sans revenir régulièrement à un clavier fr azerty. Sauf pour l'accès à certaines touches spéciales (genre euro, ou prtscrn dont je ne me souviens pas l'emplacement).
Alors évidemment je ne vais pas encore très vite (d'où l`utilisation de l'autre qd j'en ai besoin) et j'ai un peu trop tendance à regarder les touches (oui elles sont marquées) mais c'est de mieux en mieux 😀

#mechkeeb

#AgendaRôliste 🗓
L’association L'Auberge des Rêveurs organise la 1ʳᵉ édition du festival Meujeuteries & Merveilles et vous donne RDV du 24 au 25 avril 2026 à Corné (Maine-et-Loire, 49) ! 🎲🎉

Festival Meujeuteries & Merveilles

Au programme : table de JDR, artistes, tables rondes, bar a jeux et plein d'autres suprises !

👉 https://laubergedesreveurs.fr/festival-meujeuteries-et-merveilles/
🗺 Fiche sur la carte des conventions FFJdR : https://forums.ffjdr.org/t/24-25-04-2026-festival-meujeuteries-merveilles-corne-49/3432/1

#FFJdR
#Roliste
#CalendrierSFFF
#CFCJdR🗺
#Corné
#France
https://laubergedesreveurs.fr/festival-meujeuteries-et-merveilles/

My new #corne #keycaps have arrived. It’s only to disturb the ones trying to read letters…

My split keyboard journey
--
In January 2025 I got my first split keyboard. After seeing so many Vim/Neovim video content creators use them, I also wanted to try. Now more than a year later, I'm happy to share my experience with it.

https://simondalvai.org/blog/split-keyboard-journey/

#splitkeyboards #dasbob #corne

New addition to the keyboard family. I didn't get used to low profile keycaps & switches, and a cabled split keyboard turned out surprisingly inconvenient during travel and very vulnerable to feline attacks in my desk.

The new keyboard is a Bluetooth #corne PBC and case from AliExpress (it was way cheaper than the #voyager), my hands aren't that big but it feels good to interface the computer with chonky clacks.

May write a longer text form of this on my blog, or not.

J'ai mis 3 ans à arriver à 80-90 WPM en BÉPO et je découvre l'ERGOL... Évidemment j'ai envie de tester mais j'ai vraiment pas envie de repartir à 10WPM :blobsweats:
Quelqu'un a comparé/utilisé les deux déjà ? Il y a une vraie amélioration ? (Je remarque qu'en bépo j'ai souvent mal à la main gauche...)
#bépo #ergol #splitkeyboard #crkbd #corne

Si vous avez un clavier ergonomique (libre ou non), on adorerait que vous veniez le montrer sur le stand des #Ergonautes au #CdL2025, pour le comparer à notre bestiaire.

En particulier : si vous avez un #Corne v4, @NuclearSquid serait ravi de l’utiliser quelques minutes pour lui faire un pilote #ZMK. Le #Quacken et le Corne v4 ayant une électronique similaire, ça devrait être assez simple, et on serait heureux de contribuer à ZMK.

Le boost éloigne les TMS !

2/2

Avec @NuclearSquid on vient de réaliser que le #Corne c’est un clavier qui a l’air un peu ergo pour les néophytes, mais qui est surtout très fort pour faire un compromis avec le standard en place : pas de splay, peu de stagger, et beaucoup (trop) de touches.

Le fait que notre premier ministre s’appelle presque pareil ne peut pas être un hasard. A-t-on vu #Lecornu et un Corne dans la même pièce ? Je pose juste la question. #NousSachons

Basing a split ergo keyboard layout on statistical patterns in my Rust code. https://clayto.com/2025/corne/ #rust #mechanicalkeyboards #corne

@louisvgn @ergol C’est ce qu’on recommande, oui.
L’approche pas-à-pas d’Arsenik a fait ses preuves : d’abord les touches duales sous les pouces, puis les homerow-mods.

Je suis en train de finir la configuration ZMK d’Arsenik pour le #Quacken. Quand ça sera fini, je proposerai la même chose pour le #Corne et le #Sofle, que je considère comme les deux autres « valeurs sûres » pour débuter avec des claviers ergonomiques (faible stagger, pas de splay). J’espère avoir tout ça pour le #CdL2025 !

I have been using the #corne split keyboard for about 3 weeks now, after switching from #bepo to #ergol 6 months ago.

I must say that for now, neither changes has made me more productive. I keep making typos, stop and think hard to type numbers... not exactly the improvement I desired to see.

I am going to give this thing a little more time, but it is not looking good so far.

@bnjbvr ZSA est une boite cool mais ses claviers restent des dérivés du Kinesis Contour, qui date de 1992, bien avant la révolution #1DFH. Y compris le Voyager (touches de pouce très mal placéses).

Cela dit :
1. sans dactylo stricte, *aucun* clavier ergonomique n’a le moindre intérêt ;
2. un #Ferris est utilisable avec #QwertyLafayette ou #Ergol, mais requiert la maitrise des homerow-mods (HRM). Un #Corne ou un #Atreus serait plus simple. On prépare un clavier dans cet esprit (#Quacken).

@kyva ¡Buen fichaje! Que lo disfrutes mucho.

Adjunto foto de mi #Corne por si te hace sentir más acompañado en la geekidad 😆 Y no voy a mencionar, por pundonor, el #DygmaRaise que también tengo 😅

#TecladosMecánicos #TecladosErgonómicos

@brab je ne savais pas que t'étais fan d'ergo-L. Je suis en train de me monter un #corne que j'aimerai passer sur Ergo-L J'appréhende un peu l'apprentissage.

La hype autour des clavier ergo donne des prix effarant au regard du matériel vendu :
Un clavier #Corne en kit, non soudé, sans les touches, revient à 100$...
Un clavier #Ferris Sweep déjà soudé mais en kit donc sans garantie revient à 270$ !!
Alors qu'un #Atreus qui est un produit fini ne coûte que 166€ (ce qui est déjà beaucoup, je trouve, pour un clavier avec si peu de touches !)

#ergol
1/3

Reconnaître le Somaliland : un changement géopolitique pour l’Asie occidentale ?

#Trump envisage de reconnaître le #Somaliland afin de renforcer la position occidentale dans la #Corne de l’Afrique contre le #Yémen et de contrer l’influence chinoise, mais ce faisant, il risque de s’aliéner les principaux alliés régionaux essentiels aux guerres d’Israël en Asie occidentale.

thecradle.co/articles-id/28141

#Politique #Geopolitique #USA #Afrique #Africa #Israël #Egypte #EAU

I've taken the next step on my #AltKeyboardLayout #SplitKeyboard journey where I move from the #Gallium layout to the #Graphite layout. While there is not a huge difference between these two keyboard layouts, the Gallium layout has some punctuation tweaks that might make it easier to type the \( \LaTeX \) code in my lesson handouts.

It was not without some challenges to implement #graphite on my #ZSA #Voyager keyboard though -- I captured some of my journey in this blog article:

https://www.teachmaths.org/20241229_graphite-keyboard-layout/

#ErgoMechKeyboards #Corne #QMK #Vial

I've taken the next step on my #AltKeyboardLayout #SplitKeyboard journey where I move from the #Gallium layout to the #Graphite layout. While there is not a huge difference between these two keyboard layouts, the Gallium layout has some punctuation tweaks that might make it easier to type the \( \LaTeX \) code in my lesson handouts.

It was not without some challenges to implement #graphite on my #ZSA #Voyager keyboard though -- I captured some of my journey in this blog article:

https://www.teachmaths.org/20241229_graphite-keyboard-layout/

#ErgoMechKeyboards #Corne #QMK #Vial

Dear #Mechanicalkeyboards community,

I’m looking for a case for a wireless #Corne V3.
- minimalistic
- Cherry MX style switches
- 3DPrintable or cheap to buy

What do you use?
#Mechanicalkeyboard #crkbd #CherryMX

Spent the last 3 days building a CRKBD Corne split keyboard! The first day was just spent soldering all the components together. To no surprise, not a single component worked on the first try. But since 5 hours had been spent, I decided to solve the issues the next day, redoing most of the joins until every single component worked. Today was just tweaking the layout, flashing the MCU and actually assembling the keyboard. The entirety of the keyboard cost about 46€ in parts from Taobao. The soldering kit cost 15€ from Aliexpress.

#mechanicalkeyboards #crkbd #corne

Ok, 60 g switches are cool but one has to get used to them …
Might take some time

#mechanicalkeyboard #mechanicalkeyboards #corne #crkbd #Cornekeyboard

OK, my Corne is now ready for some tinkering with QMK 😸 I really love the Cherry MX Grey switched I put in there 😻
And my Cantor finally got a nice case.

I guess I'll now have some boards to bring to #Mechanicon next year.

Well, until then I might have more than two to bring along 😹 (although these are pretty basic ones)

#splitkeyboard #keyboards #ErgonomicKeyboards #Corne #crkbd #CorneKeyboard #Cantor #CantorKeyboard #Cherry #CherryMX

I built a portable corne to bring to the office. My original corne became chunky and heavy after I got an aluminum case so I’m only going to use it on my workstation at home.
The small one only has 36 keys and is wireless.
#crkbd #corne #keyboard #mechanicalkeyboard

Of course I had to build another keyboard!

This is a super sturdy, completely hand-wired, ice cream themed corne (crkbd) with cherry mx red switches. I also designed the case to sandwich together so it can easily be thrown into my backpack.

#corne #diy #keyboard #crkbd

Ich mag sie immer mehr ☺️

#corne #mechanicalkeyboard #crkbd

lighter switches for weaker fingers and positions #crkbd #corne

A few weeks ago I have switched from blank to Legend keycaps as well as removed the case and the plate. Keeping it simple. 😎 #crkbd #corne #zmk

Small keyboard layout thoughts:

Several months back I moved to a Corne keyboard (https://github.com/foostan/crkbd), a split 40% keyboard. But I couldn't find a layout that suited so I want to share my thinking in case it helps anyone else.

First off, here is my final layout.

1/4

#MechanicalKeyboards #Corne #crkbd

testing my new coffee shop/on-the-go setup.
#devlife
#crkbd
#corne

what's your coffee shop setup?

@dctrud
That one is really expensive. I was considering that when I'm looking for a split keeb. I opt for #corne #crkbd, which I built myself. It's way cheaper that pre-built .

I was away from home for more than 2 weeks. I just took my first typing challenge with my corne keyboard since coming back and I break my PR 💪

#MonkeyType #Corne #crkbd #colemak #SplitKeyboard

@damonism love it! Having moved to my Corne a few months back I'm not sure I could go back to using anything else.

The ability to fully customise the way it works is a real game changer for me

#MechanicalKeyboards #Corne #crkbd

I’ve been tinkering with my keyboard firmware. I started with #miryoku and added a few layers to be able use it to play video games. I also enabled the oled screens and the leds #SplitKeyboard #corne #crkbd #qmk #ErgonomicKeyboard https://github.com/benoitlouy/qmk_firmware/blob/miryoku-merge-master-20230607/users/manna-harbour_miryoku/custom_config.h

I still micro-optimize my wireless low profile corne keyboard collection by adding a shiny new lowprokb corne-ish zen 3. #wireless #mechanicalkeyboard #corne #lowprofile

@arnelson to be fair it's not required nowadays to have that much space or wait for a workstation setup.
I simply got #pinecilv2 - (usb-c solder) from @PINE64, and together with good tip like bc2 (much easier to use) and some good solder wire like #kester to assemble my first mechanical keyboard.
Soldered few #pmw3360 since then as well :)
#omnifixo makes it even easier (but not required)

My whole setup squeezed between two #corne halves:

@benjaminhollon I had used #Corne and #sofle #mechanicalkeyboard s a lot, but sold them in the end. Currently I'm a #planck sized 40% keyboard user, but the split keyboard I liked most was #Ergotravel .

https://github.com/jpconstantineau/ErgoTravel

Maybe you'd like it.

Some #MechanicalKeyboard fans are celebrating the 40th day of year with #40sDay and photos of their keyboards that are 40% or less the size of a full size keeb.

Here’s my Unicorne by Boardsource and a custom cable by MechCables. Each half of the keyboard includes a joystick.

The keyboard layout is described here: https://mark.stosberg.com/markstos-corne-3x5-1-keyboard-layout/

#corne #ergomechkeyboards https://fosstodon.org/@petejohanson/111902713748820621