#cncmachine — Public Fediverse posts

Standalone CNC Tube Cutter/Notcher Does it With Plasma - Tubes! Not only is the internet a series of them, many projects in the physical wo... - https://hackaday.com/2025/10/14/standalone-cnc-tube-cutter-notcher-does-it-with-plasma/ #tubingnotcher #plasmacutter #cncmachine #cnchacks #cutting

Standalone CNC Tube Cutter/Notcher Does it With Plasma - Tubes! Not only is the internet a series of them, many projects in the physical wo... - https://hackaday.com/2025/10/14/standalone-cnc-tube-cutter-notcher-does-it-with-plasma/ #tubingnotcher #plasmacutter #cncmachine #cnchacks #cutting

Standalone CNC Tube Cutter/Notcher Does it With Plasma - Tubes! Not only is the internet a series of them, many projects in the physical wo... - https://hackaday.com/2025/10/14/standalone-cnc-tube-cutter-notcher-does-it-with-plasma/ #tubingnotcher #plasmacutter #cncmachine #cnchacks #cutting

Standalone CNC Tube Cutter/Notcher Does it With Plasma - Tubes! Not only is the internet a series of them, many projects in the physical wo... - https://hackaday.com/2025/10/14/standalone-cnc-tube-cutter-notcher-does-it-with-plasma/ #tubingnotcher #plasmacutter #cncmachine #cnchacks #cutting

Standalone CNC Tube Cutter/Notcher Does it With Plasma - Tubes! Not only is the internet a series of them, many projects in the physical wo... - https://hackaday.com/2025/10/14/standalone-cnc-tube-cutter-notcher-does-it-with-plasma/ #tubingnotcher #plasmacutter #cncmachine #cnchacks #cutting

Standalone CNC Tube Cutter/Notcher Does it With Plasma https://hackaday.com/2025/10/14/standalone-cnc-tube-cutter-notcher-does-it-with-plasma/ #tubingnotcher #plasmacutter #CNCmachine #cnchacks #cutting

Standalone CNC Tube Cutter/Notcher Does it With Plasma https://hackaday.com/2025/10/14/standalone-cnc-tube-cutter-notcher-does-it-with-plasma/ #tubingnotcher #plasmacutter #CNCmachine #cnchacks #cutting

Standalone CNC Tube Cutter/Notcher Does it With Plasma https://hackaday.com/2025/10/14/standalone-cnc-tube-cutter-notcher-does-it-with-plasma/ #tubingnotcher #plasmacutter #CNCmachine #cnchacks #cutting

Standalone CNC Tube Cutter/Notcher Does it With Plasma https://hackaday.com/2025/10/14/standalone-cnc-tube-cutter-notcher-does-it-with-plasma/ #tubingnotcher #plasmacutter #CNCmachine #cnchacks #cutting

The Incrediplotter: Voice Controlled Plotter from Repurposed Printer https://hackaday.com/2025/09/08/the-incrediplotter-voice-controlled-plotter-from-repurposed-printer/ #CNCmachine #penplotter #hardware #bluepill #klipper #plotter

The Incrediplotter: Voice Controlled Plotter from Repurposed Printer - There’s something uniquely satisfying about a pen plotter. Though less speedy or p... - https://hackaday.com/2025/09/08/the-incrediplotter-voice-controlled-plotter-from-repurposed-printer/ #cncmachine #penplotter #hardware #bluepill #klipper #plotter

Human in the Loop: Compass CNC Redefines Workspace Limits https://hackaday.com/2025/07/25/human-in-the-loop-compass-cnc-redefines-workspace-limits/ #CNCmachine #ToolHacks #CNCrouter #Teensy4.1 #cnchacks

Human in the Loop: Compass CNC Redefines Workspace Limits https://hackaday.com/2025/07/25/human-in-the-loop-compass-cnc-redefines-workspace-limits/ #CNCmachine #ToolHacks #CNCrouter #Teensy4.1 #cnchacks

Human in the Loop: Compass CNC Redefines Workspace Limits https://hackaday.com/2025/07/25/human-in-the-loop-compass-cnc-redefines-workspace-limits/ #CNCmachine #ToolHacks #CNCrouter #Teensy4.1 #cnchacks

Human in the Loop: Compass CNC Redefines Workspace Limits https://hackaday.com/2025/07/25/human-in-the-loop-compass-cnc-redefines-workspace-limits/ #CNCmachine #ToolHacks #CNCrouter #Teensy4.1 #cnchacks

Human in the Loop: Compass CNC Redefines Workspace Limits - CNCs come in many forms, including mills, 3D printers, lasers, and plotters, but o... - https://hackaday.com/2025/07/25/human-in-the-loop-compass-cnc-redefines-workspace-limits/ #cncmachine #toolhacks #cncrouter #teensy4.1 #cnchacks

Human in the Loop: Compass CNC Redefines Workspace Limits - CNCs come in many forms, including mills, 3D printers, lasers, and plotters, but o... - https://hackaday.com/2025/07/25/human-in-the-loop-compass-cnc-redefines-workspace-limits/ #cncmachine #toolhacks #cncrouter #teensy4.1 #cnchacks

Human in the Loop: Compass CNC Redefines Workspace Limits - CNCs come in many forms, including mills, 3D printers, lasers, and plotters, but o... - https://hackaday.com/2025/07/25/human-in-the-loop-compass-cnc-redefines-workspace-limits/ #cncmachine #toolhacks #cncrouter #teensy4.1 #cnchacks

Human in the Loop: Compass CNC Redefines Workspace Limits - CNCs come in many forms, including mills, 3D printers, lasers, and plotters, but o... - https://hackaday.com/2025/07/25/human-in-the-loop-compass-cnc-redefines-workspace-limits/ #cncmachine #toolhacks #cncrouter #teensy4.1 #cnchacks

Human in the Loop: Compass CNC Redefines Workspace Limits - CNCs come in many forms, including mills, 3D printers, lasers, and plotters, but o... - https://hackaday.com/2025/07/25/human-in-the-loop-compass-cnc-redefines-workspace-limits/ #cncmachine #toolhacks #cncrouter #teensy4.1 #cnchacks

Head to Print Head: CNC vs FDM https://hackaday.com/2025/06/23/head-to-print-head-cnc-vs-fdm/ #3dPrinterhacks #comparisons #CNCmachine #cnchacks #3dprint

Head to Print Head: CNC vs FDM - It’s a question new makers often ask: “Should I start with a CNC machine or a 3D P... - https://hackaday.com/2025/06/23/head-to-print-head-cnc-vs-fdm/ #3dprinterhacks #comparisons #cncmachine #cnchacks #3dprint

Second CNC Machine is Twice as Nice - [Cody Lammer] built a sweet CNC router. But as always, when you build a “thing”, y... - https://hackaday.com/2025/01/12/second-cnc-machine-is-twice-as-nice/ #cncmachine #cnchacks #fluidnc #build

Second CNC Machine is Twice as Nice - [Cody Lammer] built a sweet CNC router. But as always, when you build a “thing”, y... - https://hackaday.com/2025/01/12/second-cnc-machine-is-twice-as-nice/ #cncmachine #cnchacks #fluidnc #build

Second CNC Machine is Twice as Nice - [Cody Lammer] built a sweet CNC router. But as always, when you build a “thing”, y... - https://hackaday.com/2025/01/12/second-cnc-machine-is-twice-as-nice/ #cncmachine #cnchacks #fluidnc #build

Second CNC Machine is Twice as Nice - [Cody Lammer] built a sweet CNC router. But as always, when you build a “thing”, y... - https://hackaday.com/2025/01/12/second-cnc-machine-is-twice-as-nice/ #cncmachine #cnchacks #fluidnc #build

Second CNC Machine is Twice as Nice - [Cody Lammer] built a sweet CNC router. But as always, when you build a “thing”, y... - https://hackaday.com/2025/01/12/second-cnc-machine-is-twice-as-nice/ #cncmachine #cnchacks #fluidnc #build

Second CNC Machine is Twice as Nice https://hackaday.com/2025/01/12/second-cnc-machine-is-twice-as-nice/ #CNCmachine #cnchacks #fluidnc #build

Second CNC Machine is Twice as Nice https://hackaday.com/2025/01/12/second-cnc-machine-is-twice-as-nice/ #CNCmachine #cnchacks #fluidnc #build

Second CNC Machine is Twice as Nice https://hackaday.com/2025/01/12/second-cnc-machine-is-twice-as-nice/ #CNCmachine #cnchacks #fluidnc #build

🏗️🛠️ A new addition to the museum workshop: CNC 120 x 80 cm. With it, we'll be crafting shelves, boxes, museum equipment, and more in wood, plexiglass, and aluminum. 💪

#computermuseum #computerhistory #slovenia #ljubljana #softwareheritage #digitalheritage #makers #maker #makerspace #retrocomputing #cnc #cncmachine #vintagecomputing #europee

We're so close! There's just 3.5 hrs and $65 to go until we meet our second Match Challenge goal. Donate before midnight tonight for a chance to DOUBLE your donation! Your donations go directly to tools, classes, and materials available for PUBLIC USE in the A2 Area!

Donate on our GoFundMe: https://buff.ly/3N8aI62

#nonprofit #donate #giveback #charity #community #fundraiser #support #volunteer #education #donations #socialgood #makeadifference #makerspaces #3dprinting #cncmachine #lasercutter

Just 12 hours to go until Round 2 of All Hands Active's Holiday Fundraiser ends! Hurry and donate before midnight for a chance to DOUBLE your donation!
Donate on our GoFundMe: https://rhino.li/holiday-fundraiser

#nonprofit #donate #giveback #charity #givingback #community #fundraising #giving #fundraiser #support #volunteer #education #donations #dogood #give #nonprofitorganization #socialgood #makeadifference #makerspaces #3dprinting #cncmachine #crafting #sustainability #zerowaste #repurpose #lasercutter

Some more techniques I use. I'm sure most of you are familiar with these tools, but perhaps someone out there isn't. They're two of my all-time favorites.

I use scribe rulers to get very accurate marks. I use them a lot for wood working as well. Have one in metric and one in 'merican. Need more.

I use an optical center punch for marking. It illuminates and magnifies the marks beautifully. Built half the CNC before I got one.

This is the enclosure base. 2.5mm bolts.

#CNC #CNCMachine #Maker

This is how everyone makes their CNC machines, right?

This has been my process for all the metal plates, blocks, etc. Cut roughly, sand to spec, fine-tune as-needed.

These will be the sides of the gantry junction enclosure.

#CNC #CNCMachine #Maker

I want the cable runs isolated from components - to make them, or a bad cable, easy to swap. It also prevents flex/strain at the component side. This means lots of connections going in and out with proper strain relief.

I also want to be able to swap the spindle for a laser, so it needs a connector. Finding a good way to manage it all has been a pain.

Decided the hardest option is the one I want... So I'm going to make a custom metal enclosure.

Amazing update soon™...

#CNC #CNCMachine #Maker

So, the hardest part of building a CNC machine by hand isn't:

- designing the machine
- marking and drilling
- cutting all the metal
- making it all move smoothly
- rebuilding it after a flood

No. The hardest part, apparently, is making stuff fit into a junction box. Day 105 of just trying to finish up "simple" wiring. I think I've lost it.

Maybe I'll just build another machine already in a box - much easier. In fact... why didn't I think of that earlier? IT'S GENIUS.

#CNCMachine #Maker

Wow, been awhile; too much of a mess with other projects to deal with this. It's great to finally be finishing it up.

Had to rethink a lot to deal with the wiring I wanted. Moved the x limit switches onto the z-axis to consolidate them off one connector. Required making angled adapters.

Z-axis has an adjustable stop.

Spindle and z stepper have been terminated onto connectors. Need to make the panel that will join them with the longer cables, next. Then one for the x.

#CNCMachine #CNC #Maker

Okay, so I set off with intent to get things done and became really sick for a week. Finally and slowly getting back into everything... again.

All the limit switches are mounted and wired and I feel like it's all just very chaotic now. Trying to come up with some reasonably-simple little junction at the z-axis to terminate everything and try to control all the wiring.

#CNCMachine #Maker

This $12 CNC Rotary Axis Will Make Your Head Spin - [legolor] brings us a great, cheap rotary axis to add to your small 3 axis CNC mil... - https://hackaday.com/2023/05/15/this-12-cnc-rotary-axis-will-make-your-head-spin/ #g-codepost-processing #autodeskfusion360 #rotaryaxismill #cncrotaryaxis #steppermotor #boardgames #cncmachine #tailstock #cnchacks #3dprint #blender #cncmill #g-code #chess #cnc

This $12 CNC Rotary Axis Will Make Your Head Spin - [legolor] brings us a great, cheap rotary axis to add to your small 3 axis CNC mil... - https://hackaday.com/2023/05/15/this-12-cnc-rotary-axis-will-make-your-head-spin/ #g-codepost-processing #autodeskfusion360 #rotaryaxismill #cncrotaryaxis #steppermotor #boardgames #cncmachine #tailstock #cnchacks #3dprint #blender #cncmill #g-code #chess #cnc

This $12 CNC Rotary Axis Will Make Your Head Spin - [legolor] brings us a great, cheap rotary axis to add to your small 3 axis CNC mil... - https://hackaday.com/2023/05/15/this-12-cnc-rotary-axis-will-make-your-head-spin/ #g-codepost-processing #autodeskfusion360 #rotaryaxismill #cncrotaryaxis #steppermotor #boardgames #cncmachine #tailstock #cnchacks #3dprint #blender #cncmill #g-code #chess #cnc

This $12 CNC Rotary Axis Will Make Your Head Spin - [legolor] brings us a great, cheap rotary axis to add to your small 3 axis CNC mil... - https://hackaday.com/2023/05/15/this-12-cnc-rotary-axis-will-make-your-head-spin/ #g-codepost-processing #autodeskfusion360 #rotaryaxismill #cncrotaryaxis #steppermotor #boardgames #cncmachine #tailstock #cnchacks #3dprint #blender #cncmill #g-code #chess #cnc

This $12 CNC Rotary Axis Will Make Your Head Spin - [legolor] brings us a great, cheap rotary axis to add to your small 3 axis CNC mil... - https://hackaday.com/2023/05/15/this-12-cnc-rotary-axis-will-make-your-head-spin/ #g-codepost-processing #autodeskfusion360 #rotaryaxismill #cncrotaryaxis #steppermotor #boardgames #cncmachine #tailstock #cnchacks #3dprint #blender #cncmill #g-code #chess #cnc

Design concepts... Fusion 360... I hope to make this soon on the Avid CNC machine. #cnc #cncmachine #cncwoodworking #avidcnc #fusion360

Why yes, I will be using this to cut too-complicated guitar inlays. #luthier #cncmachine

Pizza-Making CNC Machine Is The Only Tool We’ve Ever Dreamed Of - Making pizza is fun, but eating pizza is even better. Ideally, you’ll get to spend... - https://hackaday.com/2023/01/25/pizza-making-cnc-machine-is-the-only-tool-weve-ever-dreamed-of/ #cncmachine #homehacks #cheese #pizza #sauce

Carving Terrain Maps into Plywood with Software Help - CNC machines are incredibly versatile tools. At a machine shop, they can machine a... - https://hackaday.com/2022/11/28/carving-terrain-maps-into-plywood-with-software-help/ #topographicmap #cncmachine #cnchacks #plywood #relief #topo #cnc #map

Old CNC Brain Swapped With An Arduino - [Sebastian] and [Stefan Shütz] had a ISEL EP1090 CNC machine at home, sitting unus... - https://hackaday.com/2022/07/11/old-cnc-brain-swapped-with-an-arduino/ #cnccontroller #cncconversion #cncmachine #toolhacks #cnchacks #arduino #grbl #isel #cnc

Old CNC Brain Swapped With An Arduino - [Sebastian] and [Stefan Shütz] had a ISEL EP1090 CNC machine at home, sitting unus... - https://hackaday.com/2022/07/11/old-cnc-brain-swapped-with-an-arduino/ #cnccontroller #cncconversion #cncmachine #toolhacks #cnchacks #arduino #grbl #isel #cnc