#bikemaintenance — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #bikemaintenance, aggregated by home.social.
-
now, I've put a bottle holder on my << almost all parts changed >> mtb 🚲 ... honestly I thought that it was an insignificant accessory, but after some Km and my dry mouth, I changed my mind... 🤪💧 it looks strange 'cause the frame is not like the common mtb, it's foldable.. but I like it anyway...
-
now, I've put a bottle holder on my << almost all parts changed >> mtb 🚲 ... honestly I thought that it was an insignificant accessory, but after some Km and my dry mouth, I changed my mind... 🤪💧 it looks strange 'cause the frame is not like the common mtb, it's foldable.. but I like it anyway...
-
now, I've put a bottle holder on my << almost all parts changed >> mtb 🚲 ... honestly I thought that it was an insignificant accessory, but after some Km and my dry mouth, I changed my mind... 🤪💧 it looks strange 'cause the frame is not like the common mtb, it's foldable.. but I like it anyway...
-
now, I've put a bottle holder on my << almost all parts changed >> mtb 🚲 ... honestly I thought that it was an insignificant accessory, but after some Km and my dry mouth, I changed my mind... 🤪💧 it looks strange 'cause the frame is not like the common mtb, it's foldable.. but I like it anyway...
-
now, I've put a bottle holder on my << almost all parts changed >> mtb 🚲 ... honestly I thought that it was an insignificant accessory, but after some Km and my dry mouth, I changed my mind... 🤪💧 it looks strange 'cause the frame is not like the common mtb, it's foldable.. but I like it anyway...
-
Parts to finish the cargo bike’s tube replacement arrived today, and I was very quickly able to finish the job.
The reason this was so involved is I needed to replace the rear wheel’s tube. Which is the same wheel that has a hub motor (a GMAC-10T from Grin). Which already turns this from a 5 minute job to an hour+ job. However, this time, one of the nylock bolts the motor uses to secure itself to the dropouts (in addition to a torque arm) was slipping (somehow? The threads on the axle weren’t stripped) and I couldn’t get it to the specified torque. Couldn’t find a replacement m10x1.0 nylock bolt locally, so I had to order some (from McMaster, which is expensive, but I know they have what I’m looking for + they’re not Amazon).
The bolts came today, and a couple minutes later, I had a new bolt threaded on and torqued to the correct amount. Quick ride verified that it’s correctly mounted.
This is by far the worst part of rear hub motors. They’re just an absolute pain to get on or off the bike. They offer a much better riding experience than front hubs, but replacing a tube or tire is a nightmare. I should figure out if I can go tubeless with this thing.
Edit: to be clear, this is my only complaint about this setup, and I otherwise love it. I get regenerative braking in a very powerful geared hub motor. It’s perfect for carrying and pulling cargo.
-
Parts to finish the cargo bike’s tube replacement arrived today, and I was very quickly able to finish the job.
The reason this was so involved is I needed to replace the rear wheel’s tube. Which is the same wheel that has a hub motor (a GMAC-10T from Grin). Which already turns this from a 5 minute job to an hour+ job. However, this time, one of the nylock bolts the motor uses to secure itself to the dropouts (in addition to a torque arm) was slipping (somehow? The threads on the axle weren’t stripped) and I couldn’t get it to the specified torque. Couldn’t find a replacement m10x1.0 nylock bolt locally, so I had to order some (from McMaster, which is expensive, but I know they have what I’m looking for + they’re not Amazon).
The bolts came today, and a couple minutes later, I had a new bolt threaded on and torqued to the correct amount. Quick ride verified that it’s correctly mounted.
This is by far the worst part of rear hub motors. They’re just an absolute pain to get on or off the bike. They offer a much better riding experience than front hubs, but replacing a tube or tire is a nightmare. I should figure out if I can go tubeless with this thing.
Edit: to be clear, this is my only complaint about this setup, and I otherwise love it. I get regenerative braking in a very powerful geared hub motor. It’s perfect for carrying and pulling cargo.
-
Parts to finish the cargo bike’s tube replacement arrived today, and I was very quickly able to finish the job.
The reason this was so involved is I needed to replace the rear wheel’s tube. Which is the same wheel that has a hub motor (a GMAC-10T from Grin). Which already turns this from a 5 minute job to an hour+ job. However, this time, one of the nylock bolts the motor uses to secure itself to the dropouts (in addition to a torque arm) was slipping (somehow? The threads on the axle weren’t stripped) and I couldn’t get it to the specified torque. Couldn’t find a replacement m10x1.0 nylock bolt locally, so I had to order some (from McMaster, which is expensive, but I know they have what I’m looking for + they’re not Amazon).
The bolts came today, and a couple minutes later, I had a new bolt threaded on and torqued to the correct amount. Quick ride verified that it’s correctly mounted.
This is by far the worst part of rear hub motors. They’re just an absolute pain to get on or off the bike. They offer a much better riding experience than front hubs, but replacing a tube or tire is a nightmare. I should figure out if I can go tubeless with this thing.
Edit: to be clear, this is my only complaint about this setup, and I otherwise love it. I get regenerative braking in a very powerful geared hub motor. It’s perfect for carrying and pulling cargo.
-
Parts to finish the cargo bike’s tube replacement arrived today, and I was very quickly able to finish the job.
The reason this was so involved is I needed to replace the rear wheel’s tube. Which is the same wheel that has a hub motor (a GMAC-10T from Grin). Which already turns this from a 5 minute job to an hour+ job. However, this time, one of the nylock bolts the motor uses to secure itself to the dropouts (in addition to a torque arm) was slipping (somehow? The threads on the axle weren’t stripped) and I couldn’t get it to the specified torque. Couldn’t find a replacement m10x1.0 nylock bolt locally, so I had to order some (from McMaster, which is expensive, but I know they have what I’m looking for + they’re not Amazon).
The bolts came today, and a couple minutes later, I had a new bolt threaded on and torqued to the correct amount. Quick ride verified that it’s correctly mounted.
This is by far the worst part of rear hub motors. They’re just an absolute pain to get on or off the bike. They offer a much better riding experience than front hubs, but replacing a tube or tire is a nightmare. I should figure out if I can go tubeless with this thing.
Edit: to be clear, this is my only complaint about this setup, and I otherwise love it. I get regenerative braking in a very powerful geared hub motor. It’s perfect for carrying and pulling cargo.
-
Parts to finish the cargo bike’s tube replacement arrived today, and I was very quickly able to finish the job.
The reason this was so involved is I needed to replace the rear wheel’s tube. Which is the same wheel that has a hub motor (a GMAC-10T from Grin). Which already turns this from a 5 minute job to an hour+ job. However, this time, one of the nylock bolts the motor uses to secure itself to the dropouts (in addition to a torque arm) was slipping (somehow? The threads on the axle weren’t stripped) and I couldn’t get it to the specified torque. Couldn’t find a replacement m10x1.0 nylock bolt locally, so I had to order some (from McMaster, which is expensive, but I know they have what I’m looking for + they’re not Amazon).
The bolts came today, and a couple minutes later, I had a new bolt threaded on and torqued to the correct amount. Quick ride verified that it’s correctly mounted.
This is by far the worst part of rear hub motors. They’re just an absolute pain to get on or off the bike. They offer a much better riding experience than front hubs, but replacing a tube or tire is a nightmare. I should figure out if I can go tubeless with this thing.
Edit: to be clear, this is my only complaint about this setup, and I otherwise love it. I get regenerative braking in a very powerful geared hub motor. It’s perfect for carrying and pulling cargo.
-
So, I changed the chainring of my hybrid bike 🚲⚙️
Before / After
and definitely, a small change can make a big difference on the road... from heavy to light pedaling on uneven terrain.#bikemaintenance #biking #bikeparts #bicicleta #biketooter #cycling
-
So, I changed the chainring of my hybrid bike 🚲⚙️
Before / After
and definitely, a small change can make a big difference on the road... from heavy to light pedaling on uneven terrain.#bikemaintenance #biking #bikeparts #bicicleta #biketooter #cycling
-
So, I changed the chainring of my hybrid bike 🚲⚙️
Before / After
and definitely, a small change can make a big difference on the road... from heavy to light pedaling on uneven terrain.#bikemaintenance #biking #bikeparts #bicicleta #biketooter #cycling
-
So, I changed the chainring of my hybrid bike 🚲⚙️
Before / After
and definitely, a small change can make a big difference on the road... from heavy to light pedaling on uneven terrain.#bikemaintenance #biking #bikeparts #bicicleta #biketooter #cycling
-
So, I changed the chainring of my hybrid bike 🚲⚙️
Before / After
and definitely, a small change can make a big difference on the road... from heavy to light pedaling on uneven terrain.#bikemaintenance #biking #bikeparts #bicicleta #biketooter #cycling
-
More of this, please...!
The First #RepairCafé in #BosniaAndHerzegovina
12 March 2026
"The first Repair Café has opened in #Bosnia and #Herzegovina! Anida and Nerman, the initiators of #RepairCaféMostar, are giving this region a sustainable boost. 'We want to remove the barriers caused by fear and a lack of resources,' they said.
"Around Christmas last year, we received the happy news that we could welcome Repair Café Mostar: the first Repair Café in the #WesternBalkans. Anida Čmanjčanin and Nerman Turkić, the initiators, enthusiastically report on the grand opening and their intentions for the future.
Tradition and innovation go hand in hand!
"Thanks to support from the Federal Ministry of Education and Science and Repair Café International, the initiative kicked off with a festive launch. A workshop marathon attracted over 45 participants, including primary and secondary school pupils, as well as university students. Under the guidance of local experts, they learned various repair skills. These included #BicycleMaintenance, repairing #HouseholdAppliances, #textile #upcycling and #3DPrinting to replace broken plastic parts."
Read more:
https://www.repaircafe.org/en/the-first-repair-cafe-in-bosnia-and-herzegovina/#SolarPunkSunday #RepairCafesBosniaHerzegovina #BosniaHerzogovina #RightToRepair #FixIt #DIY #DIYRepairs #BikeMaintenance #RepairSkills #Fixers #BuildingCommunity #ReduceReuseRepair
-
More of this, please...!
The First #RepairCafé in #BosniaAndHerzegovina
12 March 2026
"The first Repair Café has opened in #Bosnia and #Herzegovina! Anida and Nerman, the initiators of #RepairCaféMostar, are giving this region a sustainable boost. 'We want to remove the barriers caused by fear and a lack of resources,' they said.
"Around Christmas last year, we received the happy news that we could welcome Repair Café Mostar: the first Repair Café in the #WesternBalkans. Anida Čmanjčanin and Nerman Turkić, the initiators, enthusiastically report on the grand opening and their intentions for the future.
Tradition and innovation go hand in hand!
"Thanks to support from the Federal Ministry of Education and Science and Repair Café International, the initiative kicked off with a festive launch. A workshop marathon attracted over 45 participants, including primary and secondary school pupils, as well as university students. Under the guidance of local experts, they learned various repair skills. These included #BicycleMaintenance, repairing #HouseholdAppliances, #textile #upcycling and #3DPrinting to replace broken plastic parts."
Read more:
https://www.repaircafe.org/en/the-first-repair-cafe-in-bosnia-and-herzegovina/#SolarPunkSunday #RepairCafesBosniaHerzegovina #BosniaHerzogovina #RightToRepair #FixIt #DIY #DIYRepairs #BikeMaintenance #RepairSkills #Fixers #BuildingCommunity #ReduceReuseRepair
-
More of this, please...!
The First #RepairCafé in #BosniaAndHerzegovina
12 March 2026
"The first Repair Café has opened in #Bosnia and #Herzegovina! Anida and Nerman, the initiators of #RepairCaféMostar, are giving this region a sustainable boost. 'We want to remove the barriers caused by fear and a lack of resources,' they said.
"Around Christmas last year, we received the happy news that we could welcome Repair Café Mostar: the first Repair Café in the #WesternBalkans. Anida Čmanjčanin and Nerman Turkić, the initiators, enthusiastically report on the grand opening and their intentions for the future.
Tradition and innovation go hand in hand!
"Thanks to support from the Federal Ministry of Education and Science and Repair Café International, the initiative kicked off with a festive launch. A workshop marathon attracted over 45 participants, including primary and secondary school pupils, as well as university students. Under the guidance of local experts, they learned various repair skills. These included #BicycleMaintenance, repairing #HouseholdAppliances, #textile #upcycling and #3DPrinting to replace broken plastic parts."
Read more:
https://www.repaircafe.org/en/the-first-repair-cafe-in-bosnia-and-herzegovina/#SolarPunkSunday #RepairCafesBosniaHerzegovina #BosniaHerzogovina #RightToRepair #FixIt #DIY #DIYRepairs #BikeMaintenance #RepairSkills #Fixers #BuildingCommunity #ReduceReuseRepair
-
More of this, please...!
The First #RepairCafé in #BosniaAndHerzegovina
12 March 2026
"The first Repair Café has opened in #Bosnia and #Herzegovina! Anida and Nerman, the initiators of #RepairCaféMostar, are giving this region a sustainable boost. 'We want to remove the barriers caused by fear and a lack of resources,' they said.
"Around Christmas last year, we received the happy news that we could welcome Repair Café Mostar: the first Repair Café in the #WesternBalkans. Anida Čmanjčanin and Nerman Turkić, the initiators, enthusiastically report on the grand opening and their intentions for the future.
Tradition and innovation go hand in hand!
"Thanks to support from the Federal Ministry of Education and Science and Repair Café International, the initiative kicked off with a festive launch. A workshop marathon attracted over 45 participants, including primary and secondary school pupils, as well as university students. Under the guidance of local experts, they learned various repair skills. These included #BicycleMaintenance, repairing #HouseholdAppliances, #textile #upcycling and #3DPrinting to replace broken plastic parts."
Read more:
https://www.repaircafe.org/en/the-first-repair-cafe-in-bosnia-and-herzegovina/#SolarPunkSunday #RepairCafesBosniaHerzegovina #BosniaHerzogovina #RightToRepair #FixIt #DIY #DIYRepairs #BikeMaintenance #RepairSkills #Fixers #BuildingCommunity #ReduceReuseRepair
-
More of this, please...!
The First #RepairCafé in #BosniaAndHerzegovina
12 March 2026
"The first Repair Café has opened in #Bosnia and #Herzegovina! Anida and Nerman, the initiators of #RepairCaféMostar, are giving this region a sustainable boost. 'We want to remove the barriers caused by fear and a lack of resources,' they said.
"Around Christmas last year, we received the happy news that we could welcome Repair Café Mostar: the first Repair Café in the #WesternBalkans. Anida Čmanjčanin and Nerman Turkić, the initiators, enthusiastically report on the grand opening and their intentions for the future.
Tradition and innovation go hand in hand!
"Thanks to support from the Federal Ministry of Education and Science and Repair Café International, the initiative kicked off with a festive launch. A workshop marathon attracted over 45 participants, including primary and secondary school pupils, as well as university students. Under the guidance of local experts, they learned various repair skills. These included #BicycleMaintenance, repairing #HouseholdAppliances, #textile #upcycling and #3DPrinting to replace broken plastic parts."
Read more:
https://www.repaircafe.org/en/the-first-repair-cafe-in-bosnia-and-herzegovina/#SolarPunkSunday #RepairCafesBosniaHerzegovina #BosniaHerzogovina #RightToRepair #FixIt #DIY #DIYRepairs #BikeMaintenance #RepairSkills #Fixers #BuildingCommunity #ReduceReuseRepair
-
So, my left crank is again tighten as it must be.. BUT the marks of the rough terrain are still there.... and also I found in the workshop another rare Bike model... IDK.. it looked uncomfortable to use on the streets in poor condition as is common where I live..... :thinking:🤷♂️🚲
#BikeTooter #Bikemaintenance #Biking #Fedibikes #Bikeparts #Bicicleta #Bicycle
-
So, my left crank is again tighten as it must be.. BUT the marks of the rough terrain are still there.... and also I found in the workshop another rare Bike model... IDK.. it looked uncomfortable to use on the streets in poor condition as is common where I live..... :thinking:🤷♂️🚲
#BikeTooter #Bikemaintenance #Biking #Fedibikes #Bikeparts #Bicicleta #Bicycle
-
So, my left crank is again tighten as it must be.. BUT the marks of the rough terrain are still there.... and also I found in the workshop another rare Bike model... IDK.. it looked uncomfortable to use on the streets in poor condition as is common where I live..... :thinking:🤷♂️🚲
#BikeTooter #Bikemaintenance #Biking #Fedibikes #Bikeparts #Bicicleta #Bicycle
-
So, my left crank is again tighten as it must be.. BUT the marks of the rough terrain are still there.... and also I found in the workshop another rare Bike model... IDK.. it looked uncomfortable to use on the streets in poor condition as is common where I live..... :thinking:🤷♂️🚲
#BikeTooter #Bikemaintenance #Biking #Fedibikes #Bikeparts #Bicicleta #Bicycle
-
So, my left crank is again tighten as it must be.. BUT the marks of the rough terrain are still there.... and also I found in the workshop another rare Bike model... IDK.. it looked uncomfortable to use on the streets in poor condition as is common where I live..... :thinking:🤷♂️🚲
#BikeTooter #Bikemaintenance #Biking #Fedibikes #Bikeparts #Bicicleta #Bicycle
-
#PortlandME - #RipeForRepair Meetup
April 12 @ 1:00 pm – 4:00 pm
Odd Fellows Hall
651 Forest Ave
Portland, Maine 04101 United States"#RepairMeetups are free community events where people come together to help each other fix everything from small home appliances to damaged textiles.
They’re about celebrating under- appreciated skills and learning new ones, holding on to things that take a lot of resources to make but can quickly end up in landfills, and connecting with other humans. Experts, novices and curious spectators welcome!
#BCM will be in attendance with #PortlandGearHub to offer assistance with a wide variety of common bike repairs, like brake adjustments, tuning gears, fixing flat tires, lubricating chains, and removing wobbles from wheels."
FMI:
https://www.bikemaine.org/event/ripe-for-repair-meetup-portland-2/#SolarPunkSunday #BicycleCoalitionOfMaine
#BikeTooter #BuildingCommunity
#Repair #RepairReuseRestore
#BikeMaintenance #Workshops #SkillSharing #MaineEvents #FixIt -
#PortlandME - #RipeForRepair Meetup
April 12 @ 1:00 pm – 4:00 pm
Odd Fellows Hall
651 Forest Ave
Portland, Maine 04101 United States"#RepairMeetups are free community events where people come together to help each other fix everything from small home appliances to damaged textiles.
They’re about celebrating under- appreciated skills and learning new ones, holding on to things that take a lot of resources to make but can quickly end up in landfills, and connecting with other humans. Experts, novices and curious spectators welcome!
#BCM will be in attendance with #PortlandGearHub to offer assistance with a wide variety of common bike repairs, like brake adjustments, tuning gears, fixing flat tires, lubricating chains, and removing wobbles from wheels."
FMI:
https://www.bikemaine.org/event/ripe-for-repair-meetup-portland-2/#SolarPunkSunday #BicycleCoalitionOfMaine
#BikeTooter #BuildingCommunity
#Repair #RepairReuseRestore
#BikeMaintenance #Workshops #SkillSharing #MaineEvents #FixIt -
#PortlandME - #RipeForRepair Meetup
April 12 @ 1:00 pm – 4:00 pm
Odd Fellows Hall
651 Forest Ave
Portland, Maine 04101 United States"#RepairMeetups are free community events where people come together to help each other fix everything from small home appliances to damaged textiles.
They’re about celebrating under- appreciated skills and learning new ones, holding on to things that take a lot of resources to make but can quickly end up in landfills, and connecting with other humans. Experts, novices and curious spectators welcome!
#BCM will be in attendance with #PortlandGearHub to offer assistance with a wide variety of common bike repairs, like brake adjustments, tuning gears, fixing flat tires, lubricating chains, and removing wobbles from wheels."
FMI:
https://www.bikemaine.org/event/ripe-for-repair-meetup-portland-2/#SolarPunkSunday #BicycleCoalitionOfMaine
#BikeTooter #BuildingCommunity
#Repair #RepairReuseRestore
#BikeMaintenance #Workshops #SkillSharing #MaineEvents #FixIt -
#PortlandME - #RipeForRepair Meetup
April 12 @ 1:00 pm – 4:00 pm
Odd Fellows Hall
651 Forest Ave
Portland, Maine 04101 United States"#RepairMeetups are free community events where people come together to help each other fix everything from small home appliances to damaged textiles.
They’re about celebrating under- appreciated skills and learning new ones, holding on to things that take a lot of resources to make but can quickly end up in landfills, and connecting with other humans. Experts, novices and curious spectators welcome!
#BCM will be in attendance with #PortlandGearHub to offer assistance with a wide variety of common bike repairs, like brake adjustments, tuning gears, fixing flat tires, lubricating chains, and removing wobbles from wheels."
FMI:
https://www.bikemaine.org/event/ripe-for-repair-meetup-portland-2/#SolarPunkSunday #BicycleCoalitionOfMaine
#BikeTooter #BuildingCommunity
#Repair #RepairReuseRestore
#BikeMaintenance #Workshops #SkillSharing #MaineEvents #FixIt -
#PortlandME - #RipeForRepair Meetup
April 12 @ 1:00 pm – 4:00 pm
Odd Fellows Hall
651 Forest Ave
Portland, Maine 04101 United States"#RepairMeetups are free community events where people come together to help each other fix everything from small home appliances to damaged textiles.
They’re about celebrating under- appreciated skills and learning new ones, holding on to things that take a lot of resources to make but can quickly end up in landfills, and connecting with other humans. Experts, novices and curious spectators welcome!
#BCM will be in attendance with #PortlandGearHub to offer assistance with a wide variety of common bike repairs, like brake adjustments, tuning gears, fixing flat tires, lubricating chains, and removing wobbles from wheels."
FMI:
https://www.bikemaine.org/event/ripe-for-repair-meetup-portland-2/#SolarPunkSunday #BicycleCoalitionOfMaine
#BikeTooter #BuildingCommunity
#Repair #RepairReuseRestore
#BikeMaintenance #Workshops #SkillSharing #MaineEvents #FixIt -
#PortlandME - #RipeForRepair Meetup
March 8 @ 1:00 pm – 4:00 pm
Odd Fellows Hall
651 Forest Ave
Portland, Maine 04101 United States"#RepairMeetups are free community events where people come together to help each other fix everything from small home appliances to damaged textiles.
They’re about celebrating under- appreciated skills and learning new ones, holding on to things that take a lot of resources to make but can quickly end up in landfills, and connecting with other humans. Experts, novices and curious spectators welcome!
#BCM will be in attendance with #PortlandGearHub to offer assistance with a wide variety of common bike repairs, like brake adjustments, tuning gears, fixing flat tires, lubricating chains, and removing wobbles from wheels."
https://www.bikemaine.org/event/ripe-for-repair-meetup-portland/
#SolarPunkSunday #BicycleCoalitionOfMaine #BikeTooter #BuildingCommunity #Repair #RepairReuseRestore #BikeMaintenance #Workshops #SkillSharing #MaineEvents #FixIt
-
#PortlandME - #RipeForRepair Meetup
March 8 @ 1:00 pm – 4:00 pm
Odd Fellows Hall
651 Forest Ave
Portland, Maine 04101 United States"#RepairMeetups are free community events where people come together to help each other fix everything from small home appliances to damaged textiles.
They’re about celebrating under- appreciated skills and learning new ones, holding on to things that take a lot of resources to make but can quickly end up in landfills, and connecting with other humans. Experts, novices and curious spectators welcome!
#BCM will be in attendance with #PortlandGearHub to offer assistance with a wide variety of common bike repairs, like brake adjustments, tuning gears, fixing flat tires, lubricating chains, and removing wobbles from wheels."
https://www.bikemaine.org/event/ripe-for-repair-meetup-portland/
#SolarPunkSunday #BicycleCoalitionOfMaine #BikeTooter #BuildingCommunity #Repair #RepairReuseRestore #BikeMaintenance #Workshops #SkillSharing #MaineEvents #FixIt
-
#PortlandME - #RipeForRepair Meetup
March 8 @ 1:00 pm – 4:00 pm
Odd Fellows Hall
651 Forest Ave
Portland, Maine 04101 United States"#RepairMeetups are free community events where people come together to help each other fix everything from small home appliances to damaged textiles.
They’re about celebrating under- appreciated skills and learning new ones, holding on to things that take a lot of resources to make but can quickly end up in landfills, and connecting with other humans. Experts, novices and curious spectators welcome!
#BCM will be in attendance with #PortlandGearHub to offer assistance with a wide variety of common bike repairs, like brake adjustments, tuning gears, fixing flat tires, lubricating chains, and removing wobbles from wheels."
https://www.bikemaine.org/event/ripe-for-repair-meetup-portland/
#SolarPunkSunday #BicycleCoalitionOfMaine #BikeTooter #BuildingCommunity #Repair #RepairReuseRestore #BikeMaintenance #Workshops #SkillSharing #MaineEvents #FixIt
-
#PortlandME - #RipeForRepair Meetup
March 8 @ 1:00 pm – 4:00 pm
Odd Fellows Hall
651 Forest Ave
Portland, Maine 04101 United States"#RepairMeetups are free community events where people come together to help each other fix everything from small home appliances to damaged textiles.
They’re about celebrating under- appreciated skills and learning new ones, holding on to things that take a lot of resources to make but can quickly end up in landfills, and connecting with other humans. Experts, novices and curious spectators welcome!
#BCM will be in attendance with #PortlandGearHub to offer assistance with a wide variety of common bike repairs, like brake adjustments, tuning gears, fixing flat tires, lubricating chains, and removing wobbles from wheels."
https://www.bikemaine.org/event/ripe-for-repair-meetup-portland/
#SolarPunkSunday #BicycleCoalitionOfMaine #BikeTooter #BuildingCommunity #Repair #RepairReuseRestore #BikeMaintenance #Workshops #SkillSharing #MaineEvents #FixIt
-
#PortlandME - #RipeForRepair Meetup
March 8 @ 1:00 pm – 4:00 pm
Odd Fellows Hall
651 Forest Ave
Portland, Maine 04101 United States"#RepairMeetups are free community events where people come together to help each other fix everything from small home appliances to damaged textiles.
They’re about celebrating under- appreciated skills and learning new ones, holding on to things that take a lot of resources to make but can quickly end up in landfills, and connecting with other humans. Experts, novices and curious spectators welcome!
#BCM will be in attendance with #PortlandGearHub to offer assistance with a wide variety of common bike repairs, like brake adjustments, tuning gears, fixing flat tires, lubricating chains, and removing wobbles from wheels."
https://www.bikemaine.org/event/ripe-for-repair-meetup-portland/
#SolarPunkSunday #BicycleCoalitionOfMaine #BikeTooter #BuildingCommunity #Repair #RepairReuseRestore #BikeMaintenance #Workshops #SkillSharing #MaineEvents #FixIt
-
and here, more improvements from <<this/to that>>... in two of my bikes, the first row; the reinforced potency in my hybrid classic bike to resist the dirt road, in the second row; the rear derailleur and the mega range sprocket in my mtb... 😃👌🚲 🚴♂️
-
and here, more improvements from <<this/to that>>... in two of my bikes, the first row; the reinforced potency in my hybrid classic bike to resist the dirt road, in the second row; the rear derailleur and the mega range sprocket in my mtb... 😃👌🚲 🚴♂️
-
and here, more improvements from <<this/to that>>... in two of my bikes, the first row; the reinforced potency in my hybrid classic bike to resist the dirt road, in the second row; the rear derailleur and the mega range sprocket in my mtb... 😃👌🚲 🚴♂️
-
and here, more improvements from <<this/to that>>... in two of my bikes, the first row; the reinforced potency in my hybrid classic bike to resist the dirt road, in the second row; the rear derailleur and the mega range sprocket in my mtb... 😃👌🚲 🚴♂️
-
ya quedo puesto el nuevo desviador y piñon en mi *mula híbrida yucateca* para seguir dándole a las subidas en la loma.. sí que se siente la diferencia, sólo falta hacer lo mismo con mi mtb y a seguir haciendo pierna y pulmón... 😀🚲 ⛰️
-
ya quedo puesto el nuevo desviador y piñon en mi *mula híbrida yucateca* para seguir dándole a las subidas en la loma.. sí que se siente la diferencia, sólo falta hacer lo mismo con mi mtb y a seguir haciendo pierna y pulmón... 😀🚲 ⛰️
-
ya quedo puesto el nuevo desviador y piñon en mi *mula híbrida yucateca* para seguir dándole a las subidas en la loma.. sí que se siente la diferencia, sólo falta hacer lo mismo con mi mtb y a seguir haciendo pierna y pulmón... 😀🚲 ⛰️
-
ya quedo puesto el nuevo desviador y piñon en mi *mula híbrida yucateca* para seguir dándole a las subidas en la loma.. sí que se siente la diferencia, sólo falta hacer lo mismo con mi mtb y a seguir haciendo pierna y pulmón... 😀🚲 ⛰️
-
I just installed a pair of Green marathon (done with the multiple punctures on dirty london roads for a while) with that TyreGlider.
This is the new sliced bread, I ordered a pair to have on all the bikes tool bags -
I just installed a pair of Green marathon (done with the multiple punctures on dirty london roads for a while) with that TyreGlider.
This is the new sliced bread, I ordered a pair to have on all the bikes tool bags -
I just installed a pair of Green marathon (done with the multiple punctures on dirty london roads for a while) with that TyreGlider.
This is the new sliced bread, I ordered a pair to have on all the bikes tool bags -
I just installed a pair of Green marathon (done with the multiple punctures on dirty london roads for a while) with that TyreGlider.
This is the new sliced bread, I ordered a pair to have on all the bikes tool bags -
I just installed a pair of Green marathon (done with the multiple punctures on dirty london roads for a while) with that TyreGlider.
This is the new sliced bread, I ordered a pair to have on all the bikes tool bags -
Hermosura de piñones mega range 🤩, tal vez muchos ya los consideren obsoletos pero a mi me gustan por su sencillez y por económicos.. ya me los quiero estrenar en dos de mis bicis.. 🚲⚙️🚴🏻♂️
-
Hermosura de piñones mega range 🤩, tal vez muchos ya los consideren obsoletos pero a mi me gustan por su sencillez y por económicos.. ya me los quiero estrenar en dos de mis bicis.. 🚲⚙️🚴🏻♂️