#bigtreetech — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #bigtreetech, aggregated by home.social.
-
Ich habe hier ein nicht mehr benötigtes Panda PWR von #BIGTREETECH zu verkufen.
Gerne teilen.
:boostOK: -
These #GyroGrip Pro printing plates from #Bigtreetech are really awesome! PLA adheres so firmly that I had to really abuse this plate to get the print off. Unfortunately, it ended up with a few unsightly deep scratches. 😟
-
Always interesting. If I want to buy something from #Bigtreetech / #BIQU, I put it in my shopping basket and leave it there for the time being.
A few days later I get a reminder to complete the purchase after all, together with a 5% coupon code. And if I leave it further, sometimes I even get a 10% coupon code.
Every time. 😃
-
If you're trying to switch your Panda Touch to the K-Touch firmware: just follow the standard OTA procedure and load the firmware.bin and img files. The other 2 files on the Github are apparently not necessary, and you also do not need to use their Windows-only flashing tool. #BigTreeTech #3DPrinting #Klipper
-
Maybe time to switch the #BigTreeTech Panda Touch over to #Klipper usage? I only ever use it for monitoring purposes and I have plenty of ways to do that.
My Klipper printers on the other hand could use an actual interface that isn’t a phone. #3DPrinting
-
#BigTreeTech is supposedly working on a replacement board for #BambuLab printers. Nothing is confirmed though but another effort is bringing #klipper to the P1S #3dprinting
https://www.allaboutbambu.com/2025/01/26/bigtreetech-is-supposedly-working-on-a-replacement-board-for-bambu-lab-printers/ -
@layered Nice, I appreciated that level of communication. I started to dislike #BigTreeTech for their lack of reactions on Bug reports on the SKR Mini, but this increases my personal rating quite a bit again.
-
Interesting background from #BigTreeTech on their collaboration with #BambuLab regarding their Panda Touch.
-
Bummer! It seems that #BigTreeTech is currently working on a replacement board for #BambuLab #X1C printers (running Klipper), to fix that dreadful firmware desaster. 😳
-
Parts kit has arrived! #deathracers #3dprinting #SMRRF #BigTreeTech
-
Haha... Sometimes it pays off to leave things in your shopping cart for a bit. #BigTreeTech had sent me an email reminding me to complete my purchase. And now I got another email, this time with a discount code. 😃
-
Well, I’m done. Just finished the „Panda Touch Dock" project, made lots of photos, wrote a documentation and published all on #Makerworld.
Have fun printing! 😎
PLEASE spread the word and boost it as much as you can. 🙏:BoostOK:
#3DPrint #3DPrinting #BambuLab #PandaTouch #BigTreeTech
// @3Dprinting -
I have an inside pool. 😃
This new print plate by #BigTreeTech looks awesome! -
I've kind of been saving this -
I made a trip up to #Columbus #Ohio this morning, because #Microcenter has the #Anycubic #Kobra3 #3Dprinter Before i went up I reversed it online, just so I knew I wouldn't be wasting a trip up.
And I also decided to look to see what they had on clearance.....
And I found 2 #Biqu #Bigtreetech 3d printers, one was $80.00 and one was $56.00I didn't really need 3 brand new printers, but at that price it's hard to pass them up.
-
For three months now, I've had a #P1S in addition to my #BambuLab #X1C. I've had the Panda Touch Display from #BigTreeTech since January of this year. It's a great device. But now it's time to find its place on the P1S.
For this purpose, I have designed a dock that can be tilted with a hinge, similar to the one on the X1C. I have missed this feature in all the docks and mounts that have been available so far.
-
What The CB1 SHOULD Have Been! #BigTreeTech CB2 For #Klipper
#ModBot
#Science #Engineering #ComputerHardware #3DPrinting
https://www.youtube.com/watch?v=vooDaEo6ObI -
Just arrived: Panda Touch von #BigtreeTech. Nur echt mit Quietscheente. 😍
-
My „Bambu Touch“ display by #BigtreeTech is on its way.
*Restlessly tribbeling back and forth* 🙄
-
I watercooled my #3Dprinter so you don't have to! Actually, watercooling your extruder isn't as insane as you may think! Check out this #BigTreeTech kit to enable 500C printing on pretty much any budget printer!
#net_r #3DPrinting
https://notenoughtech.com/3dprint/biqu-h2o/ -
I got stuck, troubleshooting my #BTT #BigTreeTech #Octopus 1.1 mainboard, installed in newly assembled #RatRig #V-core #3Dprinter, running #RatOS aka #Klipper.
Both #nozzle (#extruder) #heater and #hotbed one do not warm up. Beyond all doubt (using external power sources and hairdryer) I confirmed that both thermistors, heaters and wiring are ok.
Under warranty, RatRig sent me replacement board, which I configured, flashed with updated firmware and got the same error.
I also tried to redirect the nozzle heater power to another pin (see in the config file at lib.tepewu.pl/f/8f1d29fe05d44c…) where I hooked up the multimeter. Nothing happened, when I set up nozzle temp to 50*C - after timeout I had the same error "extruder is not heating fast enough", thus klipper shutdown.
I cannot believe to have such a bad luck to got two boards with the same hardware fault (especially that steppers and hotbed probe work perfectly), so it is something I do not know - and I run out of ideas.
Please, somebody suggest something new. Hjalp. -
I got stuck, troubleshooting my #BTT #BigTreeTech #Octopus 1.1 mainboard, installed in newly assembled #RatRig #V-core #3Dprinter, running #RatOS aka #Klipper.
Both #nozzle (#extruder) #heater and #hotbed one do not warm up. Beyond all doubt (using external power sources and hairdryer) I confirmed that both thermistors, heaters and wiring are ok.
Under warranty, RatRig sent me replacement board, which I configured, flashed with updated firmware and got the same error.
I also tried to redirect the nozzle heater power to another pin (see in the config file at lib.tepewu.pl/f/8f1d29fe05d44c…) where I hooked up the multimeter. Nothing happened, when I set up nozzle temp to 50*C - after timeout I had the same error "extruder is not heating fast enough", thus klipper shutdown.
I cannot believe to have such a bad luck to got two boards with the same hardware fault (especially that steppers and hotbed probe work perfectly), so it is something I do not know - and I run out of ideas.
Please, somebody suggest something new. Hjalp. -
I got stuck, troubleshooting my #BTT #BigTreeTech #Octopus 1.1 mainboard, installed in newly assembled #RatRig #V-core #3Dprinter, running #RatOS aka #Klipper.
Both #nozzle (#extruder) #heater and #hotbed one do not warm up. Beyond all doubt (using external power sources and hairdryer) I confirmed that both thermistors, heaters and wiring are ok.
Under warranty, RatRig sent me replacement board, which I configured, flashed with updated firmware and got the same error.
I also tried to redirect the nozzle heater power to another pin (see in the config file at lib.tepewu.pl/f/8f1d29fe05d44c…) where I hooked up the multimeter. Nothing happened, when I set up nozzle temp to 50*C - after timeout I had the same error "extruder is not heating fast enough", thus klipper shutdown.
I cannot believe to have such a bad luck to got two boards with the same hardware fault (especially that steppers and hotbed probe work perfectly), so it is something I do not know - and I run out of ideas.
Please, somebody suggest something new. Hjalp. -
I got stuck, troubleshooting my #BTT #BigTreeTech #Octopus 1.1 mainboard, installed in newly assembled #RatRig #V-core #3Dprinter, running #RatOS aka #Klipper.
Both #nozzle (#extruder) #heater and #hotbed one do not warm up. Beyond all doubt (using external power sources and hairdryer) I confirmed that both thermistors, heaters and wiring are ok.
Under warranty, RatRig sent me replacement board, which I configured, flashed with updated firmware and got the same error.
I also tried to redirect the nozzle heater power to another pin (see in the config file at lib.tepewu.pl/f/8f1d29fe05d44c…) where I hooked up the multimeter. Nothing happened, when I set up nozzle temp to 50*C - after timeout I had the same error "extruder is not heating fast enough", thus klipper shutdown.
I cannot believe to have such a bad luck to got two boards with the same hardware fault (especially that steppers and hotbed probe work perfectly), so it is something I do not know - and I run out of ideas.
Please, somebody suggest something new. Hjalp. -
I got stuck, troubleshooting my #BTT #BigTreeTech #Octopus 1.1 mainboard, installed in newly assembled #RatRig #V-core #3Dprinter, running #RatOS aka #Klipper.
Both #nozzle (#extruder) #heater and #hotbed one do not warm up. Beyond all doubt (using external power sources and hairdryer) I confirmed that both thermistors, heaters and wiring are ok.
Under warranty, RatRig sent me replacement board, which I configured, flashed with updated firmware and got the same error.
I also tried to redirect the nozzle heater power to another pin (see in the config file at lib.tepewu.pl/f/8f1d29fe05d44c…) where I hooked up the multimeter. Nothing happened, when I set up nozzle temp to 50*C - after timeout I had the same error "extruder is not heating fast enough", thus klipper shutdown.
I cannot believe to have such a bad luck to got two boards with the same hardware fault (especially that steppers and hotbed probe work perfectly), so it is something I do not know - and I run out of ideas.
Please, somebody suggest something new. Hjalp. -
Looking at my reassembled Ender 5 Plus I realised that I never got around to submitting a PR with my configuration to the Marlin configuration project. With a gap in contracts looming I guess I’ll have time next month 😀 #3DPrinting #Ender5Plus #BigTreeTech #Microswiss
-
After way too long, I finally got my BTT SFS v2.0 working with a BTT SKR E3 mini V3:
Black and green plug goes into PWR-DET. Red and blue go into E0-stop.
After that, be sure to set the state to HIGH not LOW if you're using Marlin 2.1.x
FIL_RUNOUT_PIN PC12
FIL_MOTION1_PIN PC15that little bit of knowledge took me about three days of messing around to figure out.
Docs on this combination of hardware seem to be non-existent. #3dprinting #filament #marlin #bigtreetech #btt
-
I printed this. 3.5kg of pla and PLA+. 135+ hours of printing. 5oz of 5-minute epoxy holding the pieces together.
Mostly printed on an ender3 retrofitted with an ender extender 400xl kit, a btt e3 mini skr V3, and an 0.8 nozzle. 0.4 layers at 50mm/sec. Oh, and a creality abl sensor. #creality #ender3 #enderextender #bigtreetech #3dprinting -
Here's a bunch of 3D models I've made or remixed for the Ender 5 S1 printer and / or the Creality Sprite extruder, enjoy!
- Cooling Rig with dual 5015 + 4020 + Zero Y Offset: https://www.printables.com/model/466361-ender-5-s1-cooling-dual-5015-4020-zero-y-offset-nb
- EBB36 Mount: https://www.printables.com/model/456534-ebb36-mount-for-creality-sprite-ender-5-s1
- Case for DC buck converters based on MP1584 https://www.printables.com/model/476993-case-for-dc-converter-based-on-mp1584
- LED light bar mount: https://www.printables.com/model/468315-led-light-bar-bar-mount-2020-v-slot
- Hotend Mount / Adapter: https://www.printables.com/model/452284-hotend-mount-adapter-for-ender-5-s1
- Nozzle Cleaning Brush: https://www.printables.com/model/450432-nozzle-cleaning-brush-ender-5-s1-2020-mount
- CR-Touch - Zero Y Offset Mod: https://www.printables.com/model/440272-ender-5-s1-cr-touch-zero-y-offset-mod-stronger-lon#3DPrinting #Ender #Ender5 #Ender5S1 #Creality #Sprite #3DModel #Printing #OpenSource #Printable #BigTreeTech #BTT
-
This afternoon I shall be configuring my #Ender5Plus and running a test print now that the #BigTreeTech #SKR2 board is installed and wired up correctly.
-
I’ve at last found some time to troubleshoot the #BigTreeTech SKR 2 I installed into the #Creality #Ender5Plus at Christmas.
I removed all the cables and then reconnected them one at a time, turning the power on afterwards and waiting to see what happened.
Everything worked fine, until I got to the last thing to connect, the BLTouch module. As soon as the three-wire connector was plugged in, the board started shutting down again.
-
My new mainsail development system (BTT Manta M5P + CB1). Now my BTT SKR 1.3 can finally be retired.
-
My new mainsail development system (BTT Manta M5P + CB1). Now my BTT SKR 1.3 can finally be retired.
-
My new mainsail development system (BTT Manta M5P + CB1). Now my BTT SKR 1.3 can finally be retired.
-
My new mainsail development system (BTT Manta M5P + CB1). Now my BTT SKR 1.3 can finally be retired.
-
Not quite happy with the depth/resolution/scale of the texture. I will probably rework my 3D model and try again. 🎼by 🌞 O))).
.
#mastoart #flipmill #cncrouter #tapermill #taperballmill #tactileart #tactilesculpture #handheldsculpture #openbuilds #ooznest #workbeecnc #leadcnc #oxcnc #opensourcehardware #shapeoko #xcarvepro #rhino3D #fusion360 #fusion360CAM #rhinoCAM #mach4 #GRBL #cncshield #reprap #bigtreetech #reprapramps #spetool #TrinamicMotionControl #mach3 #sainsmart -
Not quite happy with the depth/resolution/scale of the texture. I will probably rework my 3D model and try again. 🎼by 🌞 O))).
.
#mastoart #flipmill #cncrouter #tapermill #taperballmill #tactileart #tactilesculpture #handheldsculpture #openbuilds #ooznest #workbeecnc #leadcnc #oxcnc #opensourcehardware #shapeoko #xcarvepro #rhino3D #fusion360 #fusion360CAM #rhinoCAM #mach4 #GRBL #cncshield #reprap #bigtreetech #reprapramps #spetool #TrinamicMotionControl #mach3 #sainsmart