#baseboard — Public Fediverse posts on home.social

Neurodivergent BC :ir: :audhd: @[email protected] · 2026-04-28 · 19:10 UTC

LMFAO the company I bought #smartthermostats from wants me to #beta test their newest model, in the #summer of all seasons of the year. Like why? My #thermostats are off all summer since they are for #baseboard #heaters, they should be doing the beta testing for this in #winter, do beta testing for the #AC & #heatpump thermostats in the summer instead. #smarthome

#smartthermostats #beta #summer #thermostats #baseboard #heaters

Neurodivergent BC :ir: :audhd: @[email protected] · 2026-04-28 · 19:10 UTC

LMFAO the company I bought #smartthermostats from wants me to #beta test their newest model, in the #summer of all seasons of the year. Like why? My #thermostats are off all summer since they are for #baseboard #heaters, they should be doing the beta testing for this in #winter, do beta testing for the #AC & #heatpump thermostats in the summer instead. #smarthome

#smartthermostats #beta #summer #thermostats #baseboard #heaters

Neurodivergent BC :ir: :audhd: @[email protected] · 2026-04-28 · 19:10 UTC

LMFAO the company I bought #smartthermostats from wants me to #beta test their newest model, in the #summer of all seasons of the year. Like why? My #thermostats are off all summer since they are for #baseboard #heaters, they should be doing the beta testing for this in #winter, do beta testing for the #AC & #heatpump thermostats in the summer instead. #smarthome

#smartthermostats #beta #summer #thermostats #baseboard #heaters

Neurodivergent BC :ir: :audhd: @[email protected] · 2026-04-28 · 19:10 UTC

LMFAO the company I bought #smartthermostats from wants me to #beta test their newest model, in the #summer of all seasons of the year. Like why? My #thermostats are off all summer since they are for #baseboard #heaters, they should be doing the beta testing for this in #winter, do beta testing for the #AC & #heatpump thermostats in the summer instead. #smarthome

#smarthome #heatpump #ac #winter #heaters #baseboard

Thinklaser @[email protected] · 2025-09-26 · 11:31 UTC

Lasers can be used to engrave texture such as brick, cobble stone and wood planks into sheet material for model making. Here is a sheet of MDF being engraves with a stone pattern for a base board.
#ModelMaking #BaseBoard #LaserEngrving #ThinkLaser

#modelmaking #baseboard #laserengrving #thinklaser

Phil Haigh @[email protected] · 2025-04-21 · 16:31 UTC

Early trial fitting of the next baseboard, which I designed yesterday evening and built today. This Easter has been a write-off as my partner is still in bed getting over the COVID infection I first caught over three weeks ago.

This is the first of three that will bridge the gap between the helix and the board in the back left corner of the room.

This board is in approximately the right position and the hatched area is to be cut out to ensure the board doesn’t interfere with the helix.

That’s it until the end of the week. I need to decide how this board is anchored to the helix board, and there is more than one way to do that. Needs some consideration.

#ModelRailway #Baseboard #Progress

#modelrailway #baseboard #progress

Phil Haigh @[email protected] · 2025-04-21 · 16:31 UTC

Early trial fitting of the next baseboard, which I designed yesterday evening and built today. This Easter has been a write-off as my partner is still in bed getting over the COVID infection I first caught over three weeks ago.

This is the first of three that will bridge the gap between the helix and the board in the back left corner of the room.

This board is in approximately the right position and the hatched area is to be cut out to ensure the board doesn’t interfere with the helix.

That’s it until the end of the week. I need to decide how this board is anchored to the helix board, and there is more than one way to do that. Needs some consideration.

#ModelRailway #Baseboard #Progress

#modelrailway #baseboard #progress

Phil Haigh @[email protected] · 2025-04-21 · 16:31 UTC

Early trial fitting of the next baseboard, which I designed yesterday evening and built today. This Easter has been a write-off as my partner is still in bed getting over the COVID infection I first caught over three weeks ago.

This is the first of three that will bridge the gap between the helix and the board in the back left corner of the room.

This board is in approximately the right position and the hatched area is to be cut out to ensure the board doesn’t interfere with the helix.

That’s it until the end of the week. I need to decide how this board is anchored to the helix board, and there is more than one way to do that. Needs some consideration.

#ModelRailway #Baseboard #Progress

#modelrailway #baseboard #progress

Phil Haigh @[email protected] · 2025-04-21 · 16:31 UTC

Early trial fitting of the next baseboard, which I designed yesterday evening and built today. This Easter has been a write-off as my partner is still in bed getting over the COVID infection I first caught over three weeks ago.

This is the first of three that will bridge the gap between the helix and the board in the back left corner of the room.

This board is in approximately the right position and the hatched area is to be cut out to ensure the board doesn’t interfere with the helix.

That’s it until the end of the week. I need to decide how this board is anchored to the helix board, and there is more than one way to do that. Needs some consideration.

#ModelRailway #Baseboard #Progress

#progress #baseboard #modelrailway

Phil Haigh @[email protected] · 2025-04-21 · 16:31 UTC

Early trial fitting of the next baseboard, which I designed yesterday evening and built today. This Easter has been a write-off as my partner is still in bed getting over the COVID infection I first caught over three weeks ago.

This is the first of three that will bridge the gap between the helix and the board in the back left corner of the room.

This board is in approximately the right position and the hatched area is to be cut out to ensure the board doesn’t interfere with the helix.

That’s it until the end of the week. I need to decide how this board is anchored to the helix board, and there is more than one way to do that. Needs some consideration.

#ModelRailway #Baseboard #Progress

#modelrailway #baseboard #progress

Brad Linder @[email protected] · 2024-12-18 · 17:18 UTC

Build your own tablet with this $31 Orange Pi CM5 baseboard

The Orange Pi CM5 is a computer-on-a-module that launched earlier this year with a Rockchip RK3588S processor and support for up to 16GB of memory. At the time Orange Pi introduced a baseboard for the CM5 that would give the little computer a bunch of ports including USB, HDMI, and Ethernet.

Now Orange Pi has launched a new baseboard designed to let you build your own tablet, although you could also use it for other applications. The new Orange Pi CM5 Tablet Base Board is available from Amazon for $31.

One of the biggest differences between the original baseboard and the tablet version is that the original had three Ethernet ports and the tablet board has none. But the tablet board supports WiFi 5 and Bluetooth 5.0, while the original board does not.

There’s also a 26-pin GPIO header, more interfaces for video output, allowing you to use a MIPI-DSI interface for a tablet screen and an M.2 2280 M-Key connector with support for a PCIe 2.0 NVMe x1 SSD.

Some of the Orange Pi CM5 Tablet Base Board’s key features include:

3 x 100-pin connectors for an Orange Pi CM5
1 x USB 3.0 Type-C (DP 1.4 alt mode and data)
1 x USB 3.0 Type-A
1 x USB 2.0 Type-A
1 x USB Type-C (for 5V/5A power)
1 x HDMI 2.1
1 x 3.5mm audio
1 x M.2 2280 PCIe 2.0 x1 connector
1 x microSD card reader
1 x MIPI-DSI 4-lane
2 x MIPI D-PHY RX 2-lane
1 x MIPI-CSI 4-lane
1 6-pin battery holder
1 x 26-pin connector
1 x onboard microphone
2 x speaker sockets
1 x IR receiver
1 x WiFi 5/BT 5.0 chip

The board measures 90 x 66mm (3.54″ x 2.6″) and weighs 43 grams (1.52 ounces).

While the board is relatively affordable, keep in mind that it’s useless without an Orange Pi CM5 compute module, which sells for around $78 and up at AliExpress or $87 and up at Amazon. And you’ll also need to supply you own display, battery, case, and other components if you’re actually looking to build a tablet.

via CNX Software and @orangepixunlong

#baseboard #diyTablet #orangePi #orangePiCm5 #orangePiCm5TabletBaseBoard #rk358ss

#baseboard #diytablet #orangepi #orangepicm5 #orangepicm5tabletbaseboard #rk358ss

Brad Linder @[email protected] · 2024-12-18 · 17:18 UTC

Build your own tablet with this $31 Orange Pi CM5 baseboard

The Orange Pi CM5 is a computer-on-a-module that launched earlier this year with a Rockchip RK3588S processor and support for up to 16GB of memory. At the time Orange Pi introduced a baseboard for the CM5 that would give the little computer a bunch of ports including USB, HDMI, and Ethernet.

Now Orange Pi has launched a new baseboard designed to let you build your own tablet, although you could also use it for other applications. The new Orange Pi CM5 Tablet Base Board is available from Amazon for $31.

One of the biggest differences between the original baseboard and the tablet version is that the original had three Ethernet ports and the tablet board has none. But the tablet board supports WiFi 5 and Bluetooth 5.0, while the original board does not.

There’s also a 26-pin GPIO header, more interfaces for video output, allowing you to use a MIPI-DSI interface for a tablet screen and an M.2 2280 M-Key connector with support for a PCIe 2.0 NVMe x1 SSD.

Some of the Orange Pi CM5 Tablet Base Board’s key features include:

3 x 100-pin connectors for an Orange Pi CM5
1 x USB 3.0 Type-C (DP 1.4 alt mode and data)
1 x USB 3.0 Type-A
1 x USB 2.0 Type-A
1 x USB Type-C (for 5V/5A power)
1 x HDMI 2.1
1 x 3.5mm audio
1 x M.2 2280 PCIe 2.0 x1 connector
1 x microSD card reader
1 x MIPI-DSI 4-lane
2 x MIPI D-PHY RX 2-lane
1 x MIPI-CSI 4-lane
1 6-pin battery holder
1 x 26-pin connector
1 x onboard microphone
2 x speaker sockets
1 x IR receiver
1 x WiFi 5/BT 5.0 chip

The board measures 90 x 66mm (3.54″ x 2.6″) and weighs 43 grams (1.52 ounces).

While the board is relatively affordable, keep in mind that it’s useless without an Orange Pi CM5 compute module, which sells for around $78 and up at AliExpress or $87 and up at Amazon. And you’ll also need to supply you own display, battery, case, and other components if you’re actually looking to build a tablet.

via CNX Software and @orangepixunlong

#baseboard #diyTablet #orangePi #orangePiCm5 #orangePiCm5TabletBaseBoard #rk358ss