#bambustudio — Public Fediverse posts

🐼 BambuStudio's grand innovation: creatively misinterpreting the #AGPL license while serving up a tasty 403 #error. 🍜 Because who needs open-source compliance when you can just serve a hot bowl of 'Forbidden'? 😂
https://xcancel.com/josefprusa/status/2054602354851254330 #BambuStudio #Innovation #Forbidden #OpenSource #Humor #HackerNews #ngated

🐼 BambuStudio's grand innovation: creatively misinterpreting the #AGPL license while serving up a tasty 403 #error. 🍜 Because who needs open-source compliance when you can just serve a hot bowl of 'Forbidden'? 😂
https://xcancel.com/josefprusa/status/2054602354851254330 #BambuStudio #Innovation #Forbidden #OpenSource #Humor #HackerNews #ngated

BambuStudio has been violating PrusaSlicer AGPL license since their fork

https://xcancel.com/josefprusa/status/2054602354851254330

#HackerNews #BambuStudio #PrusaSlicer #AGPL #license #violation #open-source #software #3Dprinting #ethics

BambuStudio has been violating PrusaSlicer AGPL license since their fork

https://xcancel.com/josefprusa/status/2054602354851254330

#HackerNews #BambuStudio #PrusaSlicer #AGPL #license #violation #open-source #software #3Dprinting #ethics

Wer gar nicht weiß worum es geht, findet einen Einstieg hier:
https://mstdn.strafpla.net/@chris/116584104504487338

#BambuLab #3DDruck #3DDrucker #RightToRepair
#OrcaSlicer #BambuStudio #APGL #OpenSourceSoftware #FOSS

Wer gar nicht weiß worum es geht, findet einen Einstieg hier:
https://mstdn.strafpla.net/@chris/116584104504487338

#BambuLab #3DDruck #3DDrucker #RightToRepair
#OrcaSlicer #BambuStudio #APGL #OpenSourceSoftware #FOSS

Der Druck auf Bambu Lab steigt.
(auch gleich ein Wortspiel mit dabei 😅)

Nun steigt die Software Freedom Conservancy (“SFC”) mit ein in die Thematik und geht auf Konfrontation mit Bambu Lab. 👍

Dazu kommt der Streisand-Effekt.

"Comprehensive Response to Bambu's AGPLv3 Violations"
https://sfconservancy.org/news/2026/may/18/bambu-studio-3d-printer-agpl-violation-response/

#BambuLab #3DDruck #3DDrucker #RightToRepair #SoftwareFreedomConservancy #SFC #OrcaSlicer #BambuStudio #APGL #OpenSourceSoftware #FOSS

Der Druck auf Bambu Lab steigt.
(auch gleich ein Wortspiel mit dabei 😅)

Nun steigt die Software Freedom Conservancy (“SFC”) mit ein in die Thematik und geht auf Konfrontation mit Bambu Lab. 👍

Dazu kommt der Streisand-Effekt.

"Comprehensive Response to Bambu's AGPLv3 Violations"
https://sfconservancy.org/news/2026/may/18/bambu-studio-3d-printer-agpl-violation-response/

#BambuLab #3DDruck #3DDrucker #RightToRepair #SoftwareFreedomConservancy #SFC #OrcaSlicer #BambuStudio #APGL #OpenSourceSoftware #FOSS

🚨 Breaking: "Bambu Studio commits #AGPL flagrant foul!" 🤯 The article dives into the riveting realm of open-source licenses like it's the Super Bowl of software, yet somehow manages to make even the most fervent programmer yawn. If you're into reading legal documents in your free time, this one's a page-turner! 📜💤
https://github.com/jarczakpawel/OrcaSlicer-bambulab/blob/main/bambu_agpl.md #BambuStudio #OpenSource #SoftwareLicenses #LegalDocuments #Programming #HackerNews #ngated

🚨 Breaking: "Bambu Studio commits #AGPL flagrant foul!" 🤯 The article dives into the riveting realm of open-source licenses like it's the Super Bowl of software, yet somehow manages to make even the most fervent programmer yawn. If you're into reading legal documents in your free time, this one's a page-turner! 📜💤
https://github.com/jarczakpawel/OrcaSlicer-bambulab/blob/main/bambu_agpl.md #BambuStudio #OpenSource #SoftwareLicenses #LegalDocuments #Programming #HackerNews #ngated

Why bambu_networking violates the AGPL in Bambu Studio

https://github.com/jarczakpawel/OrcaSlicer-bambulab/blob/main/bambu_agpl.md

#HackerNews #bambu_networking #AGPL #BambuStudio #open_source #software_licensing #technology_discussion

Why bambu_networking violates the AGPL in Bambu Studio

https://github.com/jarczakpawel/OrcaSlicer-bambulab/blob/main/bambu_agpl.md

#HackerNews #bambu_networking #AGPL #BambuStudio #open_source #software_licensing #technology_discussion

I've not been in the 3-D printing space in a while, but I think this is worth sharing for anyone that is: https://www.jeffgeerling.com/blog/2026/bambu-lab-abusing-open-source-social-contract/

Please boost for reach.

#3DPrinting #Bambu #BambuLab #OrcaSlicer #BambuStudio #PrusaSlicer #slic3r

I've not been in the 3-D printing space in a while, but I think this is worth sharing for anyone that is: https://www.jeffgeerling.com/blog/2026/bambu-lab-abusing-open-source-social-contract/

Please boost for reach.

#3DPrinting #Bambu #BambuLab #OrcaSlicer #BambuStudio #PrusaSlicer #slic3r

Bambu Lab is accused of abusing the open-source social contract, leveraging community-driven projects like Bambu Studio while restricting user access to their own 3D printers. Their "security risk" claims are crumbling under scrutiny, revealing a deeper issue of control and vendor lock-in. As Louis Rossmann puts it, their legal claims are "bullshit." This isn't just about 3D printers; it's a…

https://www.tpp.blog/1cxs5wb

#opensource #bambulab #bambustudio

🤖 This post was AI-generated.

Bambu Lab is accused of abusing the open-source social contract, leveraging community-driven projects like Bambu Studio while restricting user access to their own 3D printers. Their "security risk" claims are crumbling under scrutiny, revealing a deeper issue of control and vendor lock-in. As Louis Rossmann puts it, their legal claims are "bullshit." This isn't just about 3D printers; it's a…

https://www.tpp.blog/1cxs5wb

#opensource #bambulab #bambustudio

🤖 This post was AI-generated.

Meer dingen die ik niet wist over 3D printen. En dan vooral over gebruik van de AMS2 Pro.

Discover the secrets of the cut tool in Bambu Studio, it's for more than just printing big objects!

New video out now:
https://youtu.be/1GKXZFTz3n8

#3DPrinting #BambuLabs #BambuStudio

Kann mir jemand sagen, was dieser rote Block da tut bzw. wie ich das herausfinden kann? Das Model kommt so aus der Makerworld und der Block ist mir ein Rätsel.
#3ddruck #bambustudio
Edit: Danke! Des Rätsels Lösung ist in den Antworten :)

Kann mir jemand sagen, was dieser rote Block da tut bzw. wie ich das herausfinden kann? Das Model kommt so aus der Makerworld und der Block ist mir ein Rätsel.
#3ddruck #bambustudio
Edit: Danke! Des Rätsels Lösung ist in den Antworten :)

How can I tell Bambu Studio to always print the bridges (in the font) in the same direction?

#3DPrint #3DPrinting #BambuStudio

How can I tell Bambu Studio to always print the bridges (in the font) in the same direction?

#3DPrint #3DPrinting #BambuStudio

So recent updates have completely bahookee'd #BambuStudio on my Debian system. So no more #3dprinting . Seems a number of other users are buggered by this besides me. Can't even run #orcaslicer as it needs the same file.
Insert some of my Grandma's special words here....

So recent updates have completely bahookee'd #BambuStudio on my Debian system. So no more #3dprinting . Seems a number of other users are buggered by this besides me. Can't even run #orcaslicer as it needs the same file.
Insert some of my Grandma's special words here....

Bloody #Bambu P1S 3d-printer hell. I don't use much it, and every time i have to fight with it to get it online. This time their own official app, #BambuStudio, just didn't recognize it.

I had to
- Disable LAN-only mode.
- Connect to it with their phone app via bluetooth.
- Update firmware.
- Download #OrcaStudio.
- Set the printer back to LAN only and enable developer mode.
- Connect with Orca with access code, fail BUT
- Connect with manual mode, SUCCESS.

I'll never buy anything Bambu again. Last year they tried to lock out 3rd party software (with huge backlash), and now ONLY the open source 3rd party program works.
#homelab #3dprinter #foss

Bloody #Bambu P1S 3d-printer hell. I don't use much it, and every time i have to fight with it to get it online. This time their own official app, #BambuStudio, just didn't recognize it.

I had to
- Disable LAN-only mode.
- Connect to it with their phone app via bluetooth.
- Update firmware.
- Download #OrcaSlicer.
- Set the printer back to LAN only and enable developer mode.
- Connect with Orca with access code, fail BUT
- Connect with manual mode, SUCCESS.

I'll never buy anything Bambu again. Last year they tried to lock out 3rd party software (with huge backlash), and now ONLY the open source 3rd party program works.
#homelab #3dprinter #foss

Bambu Studio hat ein Feature, das ich mir in dieser Eleganz in FreeCAD wünschen würde: Schneiden und Verbinder. Modell zu groß oder von der Topologie her nicht druckbar? Einfach schneiden und über das Verbinder-Tool passende Stecker-, Dübel- oder Clipverbinder einfügen.

#BambuStudio #FreeCAD #3DPrinting

Bambu Studio hat ein Feature, das ich mir in dieser Eleganz in FreeCAD wünschen würde: Schneiden und Verbinder. Modell zu groß oder von der Topologie her nicht druckbar? Einfach schneiden und über das Verbinder-Tool passende Stecker-, Dübel- oder Clipverbinder einfügen.

#BambuStudio #FreeCAD #3DPrinting

As someone who prefers #Flatpak, yea I uninstalled the outdated orca-slicer package I installed from the #AUR, and installing the (latest) Flatpak (manually) seems to work perfectly.

It does require the same workaround I needed for #BambuLab's #BambuStudio (some env variables), but that's only because I'm using #NVIDIA (on #Wayland) - to get the 3D model/bed preview working.

🔗 https://github.com/SoftFever/OrcaSlicer/releases/latest

RE: https://sakurajima.social/notes/a7rmxvzqwe

As someone who prefers #Flatpak, yea I uninstalled the outdated orca-slicer package I installed from the #AUR, and installing the (latest) Flatpak (manually) seems to work perfectly.

It does require the same workaround I needed for #BambuLab's #BambuStudio (some env variables), but that's only because I'm using #NVIDIA (on #Wayland) - to get the 3D model/bed preview working.

🔗 https://github.com/SoftFever/OrcaSlicer/releases/latest

RE: https://sakurajima.social/notes/a7rmxvzqwe

This is section of model with overhangs (~2cm). The two lines in the middle are bridges. Does anyone knows how to tell the slicer (in my case #BambuStudio) that all overhanging lines should be printed as a bridge? Any ideas?

#3DPrint #3DPrinting

Improved and Open Source: Non-Planar Infill for FDM https://hackaday.com/2025/04/23/improved-and-open-source-non-planar-infill-for-fdm/ #post-processing #3dPrinterhacks #SoftwareHacks #reinforcement #bambustudio #PrusaSlicer #3dprinting #interlayer #orcaslicer #Bambulab #g-code #python #prusa #sine #FDM

Improved and Open Source: Non-Planar Infill for FDM https://hackaday.com/2025/04/23/improved-and-open-source-non-planar-infill-for-fdm/ #post-processing #3dPrinterhacks #SoftwareHacks #reinforcement #bambustudio #PrusaSlicer #3dprinting #interlayer #orcaslicer #Bambulab #g-code #python #prusa #sine #FDM

Wieder etwas geschafft:
#Opera auch auf #openSUSE installiert und sync zum Account hergestellt, der auch unter #Win11 läuft. ✅
#BambuStudio unter openSUSE installiert aus einem #fedora #AppImage
Nachinstallation einer libgtk und nun scheint es zu laufen. Kompletter Test morgen ✅
#Zoom für openSUSE installiert ✅
, kann meinen Arbeits-Account aber erst morgen verifizieren, weil ich jetzt nicht arbeite. 🤷‍♂️

Langsam komme ich zu einer halbwegs arbeitfähigen Umgebung.

It would be really great if I could move and rearrange the plates myself in #BambuStudio. ☝🏻

#3DPrint #3DPrinting #Slicer

It would be really great if I could move and rearrange the plates myself in #BambuStudio. ☝🏻

#3DPrint #3DPrinting #Slicer

Another #3dprinting question - if I have a #BambuLab #3Dprinter, is using the #BambuStudio app the way to go for printing, or is there an alternative, better app I could use?

BambuStudio is nice in the sense that not only is it on #Linux, but it's also avai as a #Flatpak which makes installing it easy, but idk... I've only started printing stuffs yest but so far, doesn't seem like that app is as intuitive as I'd want it to be. Things seem a lil messy and not quite what I imagined or like (I think) I've seen used by others on YT videos where you could see a preview of the model you're printing in 3D where you could adjust its angle and wtnot before sending it to print.

Any suggestions/pointers?

---

Update: OH, maybe I am supposed to be getting a 3D preview of what I'm printing, I just don't (on BambuStudio) cos it's an issue on Linux perhaps specifically for #NVIDIA GPU users.

🔗 https://www.reddit.com/r/OrcaSlicer/comments/16xw6qg/the_linux_missing_preview_issue

🔗 https://github.com/bambulab/BambuStudio/issues/4669

---

Update 2: Workaround to the missing preview issue. Include each of the following env variables to the app, using #Flatseal if you're using the Flatpak:

__EGL_VENDOR_LIBRARY_FILENAMES=/usr/lib/x86_64-linux-gnu/GL/default/share/glvnd/egl_vendor.d/50_mesa.json

WEBKIT_DISABLE_DMABUF_RENDERER=1

WEBKIT_FORCE_COMPOSITING_MODE=1

WEBKIT_DISABLE_COMPOSITING_MODE=1

Another #3dprinting question - if I have a #BambuLab #3Dprinter, is using the #BambuStudio app the way to go for printing, or is there an alternative, better app I could use?

BambuStudio is nice in the sense that not only is it on #Linux, but it's also avai as a #Flatpak which makes installing it easy, but idk... I've only started printing stuffs yest but so far, doesn't seem like that app is as intuitive as I'd want it to be. Things seem a lil messy and not quite what I imagined or like (I think) I've seen used by others on YT videos where you could see a preview of the model you're printing in 3D where you could adjust its angle and wtnot before sending it to print.

Any suggestions/pointers?

---

Update: OH, maybe I am supposed to be getting a 3D preview of what I'm printing, I just don't (on BambuStudio) cos it's an issue on Linux perhaps specifically for #NVIDIA GPU users.

🔗 https://www.reddit.com/r/OrcaSlicer/comments/16xw6qg/the_linux_missing_preview_issue

🔗 https://github.com/bambulab/BambuStudio/issues/4669

---

Update 2: Workaround to the missing preview issue. Include each of the following env variables to the app, using #Flatseal if you're using the Flatpak:

__EGL_VENDOR_LIBRARY_FILENAMES=/usr/lib/x86_64-linux-gnu/GL/default/share/glvnd/egl_vendor.d/50_mesa.json

WEBKIT_DISABLE_DMABUF_RENDERER=1

WEBKIT_FORCE_COMPOSITING_MODE=1

WEBKIT_DISABLE_COMPOSITING_MODE=1

Going to hang up some xmas lights, and want a little nailing clip. A brief look at #Printables didn't come up with something quite like I envisaged, so have designed something fast in #Blender (20min) and am trying to print a first attempt on the new #Bambu #A1Mini I just got this past week.

Haven't got a functional #Cura profile yet, but managed to employ the #BambuStudio app without any of the cloud junk enabled, so seeing how that goes. [I'm fine with SDcard sneaker-net]

Going to hang up some xmas lights, and want a little nailing clip. A brief look at #Printables didn't come up with something quite like I envisaged, so have designed something fast in #Blender (20min) and am trying to print a first attempt on the new #Bambu #A1Mini I just got this past week.

Haven't got a functional #Cura profile yet, but managed to employ the #BambuStudio app without any of the cloud junk enabled, so seeing how that goes. [I'm fine with SDcard sneaker-net]

Wow! This is by far the best result. I „just" used a well dried „Support-W for PLA“ filament from #BambuLab for the interface.

#PETG #PLA #3DPrint #3DPrinting #BambuStudio

Hm... Very tricky.
This is the model I want to print. There is only one place that needs support. But this place is a large area. I have already printed several tests with different support structures. I also used #PETG as the interface material (I print in #PLA). But none of this provides a reasonably smooth surface where it needs to be supported.

Does anyone have any other ideas about what I could try?

#3DPrint #3DPrinting #BambuLab #BambuStudio

Trying out #OrcaSlicer instead of #BambuStudio, was puzzled why it couldn't find my #P1S.

Turned out that I was still running BambuStudio, and given that the P1S runs on an #ESP32, which is limited in terms of concurrent network connections, it was just not accepting any new connections.

Quitting BambuStudio and restarting OrcaSlicer fixed the issue 👍🏻

#3dprinting #3dprinter