#bambu-lab — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #bambu-lab, aggregated by home.social.
-
Bambuddy: Filamentverwaltung und 3D-Druckersteuerung für Bambulab ohne Cloud
Nachdem ich das Tool BambuBar installiert hatte, machte ich mich auf die Suche nach weiteren nützlichen Tools und wurde fündig.Unabhängigkeit von
#3ddrucker #bambu #bambulab #selfhosted #tool https://www.iphone-blog.ch/2026/08/12/bambuddy-filamentverwaltung-und-3d-druckersteuerung-fuer-bambulab-ohne-cloud -
Bad news: AMS failed to swap spools
Good news: with 3 layers left
I assume the end of the first spool did not agree with the printer and something is stuck in the tool head… I’d really prefer to not have to manually respool every single spool, but dealing with this is also annoying.
-
Also, to be clear, the problem with the heater assembly this time was a shared disaster.
The first time, it literally shoved so much PLA up in there that you couldn't rescue it or use it again.
This time, I caught it earlier and not nearly as much was gummed in there. I was trying to be comprehensive in pulling out possible clumps behind the hotend (where you can't see well) and I think I caught one of the black heater wires (amidst the black PLA) and broke it off.
-
Also, to be clear, the problem with the heater assembly this time was a shared disaster.
The first time, it literally shoved so much PLA up in there that you couldn't rescue it or use it again.
This time, I caught it earlier and not nearly as much was gummed in there. I was trying to be comprehensive in pulling out possible clumps behind the hotend (where you can't see well) and I think I caught one of the black heater wires (amidst the black PLA) and broke it off.
-
And, yes, I'm very aware of their increasingly worrisome policies and behavior. This is one of those situations of already being quite invested (and generally happy) before the corporate rug pull starts...
Exhausting.
-
And, yes, I'm very aware of their increasingly worrisome policies and behavior. This is one of those situations of already being quite invested (and generally happy) before the corporate rug pull starts...
Exhausting.
-
For the most part, my Bambu H2S is a fire and forget printer. It just does a great job 99% of the time.
Having a print detach is crazy for me. Maybe a few times total. But of the few of times it's ever happened, twice now it's blobbed up into the hotend. The first time ate the heater assembly so badly they replaced the part under warranty. I was smart enough to buy a spare of my own just in case.
Tonight was that second time. Spare used. Two more ordered.
Very irked.
-
For the most part, my Bambu H2S is a fire and forget printer. It just does a great job 99% of the time.
Having a print detach is crazy for me. Maybe a few times total. But of the few of times it's ever happened, twice now it's blobbed up into the hotend. The first time ate the heater assembly so badly they replaced the part under warranty. I was smart enough to buy a spare of my own just in case.
Tonight was that second time. Spare used. Two more ordered.
Very irked.
-
Welcome April! She's our second #BambuLab A1 Mini 3D printer. April is on long term loan from Sarah of Safe Space Merseyside. Thank you Sarah!
Excellent degree of customisation - looks like we'll have to up our game.
Workshop use from £7.50 per half day.
You can find out more about our maker space, including 3d printers, laser cutters and more, at our weekly Maker Night (every Thursday from 7 - 9:30pm) and Maker Day (second Saturday of each month from midday until 6pm).
#WeekNotes -
Welcome April! She's our second #BambuLab A1 Mini 3D printer. April is on long term loan from Sarah of Safe Space Merseyside. Thank you Sarah!
Excellent degree of customisation - looks like we'll have to up our game.
Workshop use from £7.50 per half day.
You can find out more about our maker space, including 3d printers, laser cutters and more, at our weekly Maker Night (every Thursday from 7 - 9:30pm) and Maker Day (second Saturday of each month from midday until 6pm).
#WeekNotes -
Hey Canadian 3d printing friends. As I was ordering more bambu filament recently I was reminded that the price on Amazon is way way higher than on bambu itself and the filament ships from inside Canada. Don't pay extra to those Amazon folks if you don't need to.
-
Hey Canadian 3d printing friends. As I was ordering more bambu filament recently I was reminded that the price on Amazon is way way higher than on bambu itself and the filament ships from inside Canada. Don't pay extra to those Amazon folks if you don't need to.
-
Did you know the AMS 2 won't allow you to load filament straight out of a drying cycle? Complains about the temperature being too high.
I should have loaded the filament before I started drying.
-
Ordered months ago, finally found space to put it.So, unpacked and calibrated. #3dprinter #bambulab #p2s
-
Right, let's try out this continuous print conveyor thing... #3dprinting #bambulab #platecycler
-
-
-
If you haven't checked out OrcaSlicer yet, it builds on Bambu Lab's slicer framework while keeping everything powerful and 100% open source. 🛠️
Watch the video: https://youtu.be/EjtUB9iJxJY
-
If you haven't checked out OrcaSlicer yet, it builds on Bambu Lab's slicer framework while keeping everything powerful and 100% open source. 🛠️
Watch the video: https://youtu.be/EjtUB9iJxJY
-
Why on earth can’t I change the nozzle type on my #BambuLab P1S anymore? 🤔
Does anyone have any ideas?
-
Why on earth can’t I change the nozzle type on my #BambuLab P1S anymore? 🤔
Does anyone have any ideas?
-
Wenn man erst einmal so tüchtig krank ist wie ich, mit mehreren chronischen Sachen und einer im letzten Jahr erworbenen Herzschwäche, dann kommen da schon so einige Medikamente zusammen, die man dann nehmen darf, um am Leben zu bleiben.
Wozu man aber so gar keine Lust hat, ist jeden Tag Zeit damit zu verbringen, die ganzen Medikamente in eine Pillenbox zu drücken. Deshalb also die Box für 7 Tage. #3D #3DPrinting #BambuLab #Makerworld #PillenOrganizer
-
Da Pflanzen in meinem Bürozimmer zu Hause schlechte Überlebenschancen haben (als Ex-Handwerker hat man halt eher mal einen blauen statt eines grünen Daumens), habe ich mich etwas überlebensfähiges gedruckt. 😆
https://makerworld.com/de/models/1276122-cactus-pen-holder-with-or-without-ams#profileId-1304017
-
Das muss diese #Cloud sein, von der immer alle reden...
https://status.bambulab.com/
https://downdetector.com/status/bambulab/ -
-
Trying to trigger a filament runout now so I don't have to come down and do it later. You can't load filament whole a print is going; you can only replace a spool that has run out. Takes forever when you have 5-6 feet between the AMS and the tool head.
We're past the hub now, so that's nice.
-
New AMS is throwing motor overload errors today, despite printing fine yesterday. Only thing I changed was using a shorter PTFE between the hub and toolhead. Hoping that’s all it is.
Or maybe it’s not the length of the tube, but the interior diameter…
-
Oggi decreteremo la fine della #bambulab a1 🤣
Vi aggiornerò se succede qualcosa o se va tutto bene -
BambuHelper : un petit écran de contrôle opensource pour imprimantes Bambulab
BambuHelper est un écran de contrôle pour imprimantes 3D Bambulab permettra de garder un œil distant sur vos travaux..
https://www.minimachines.net/?p=142352 #bambulab #opensource -
BambuHelper : un petit écran de contrôle opensource pour imprimantes Bambulab
BambuHelper est un écran de contrôle pour imprimantes 3D Bambulab permettra de garder un œil distant sur vos travaux..
https://www.minimachines.net/?p=142352 #bambulab #opensource -
Also für das allererste Druckprojekt nicht schlecht oder? Ist jetzt bestimmt das stylischste Teil im Badezimmer 😅
Hab ich in #tinkercad gebaut. Bin überrascht, wie stabil das geworden ist und dass das Zusammenstecken so krass gut funktioniert hat.
-
@stereo4x4 @Stanok @necrosis klasse, je mehr sich da und bei den Verbraucherzentralen melden, desto größer wird der Druck.
Man muss sich nicht alles gefallen lassen.
Das Volkswagen auch die offene API für #homeassistant zu Gunsten einer „Lösung mit ausgewählten Anbietern“ also auch ein Vendor-Lock gekappt hat, ist bekannt?
#BambuLab hat mal bei 3D-Drucker versucht, andere Software auszusperren.
Das wurde sehr schnell sehr laut.
Community hilft. -
@stereo4x4 @Stanok @necrosis klasse, je mehr sich da und bei den Verbraucherzentralen melden, desto größer wird der Druck.
Man muss sich nicht alles gefallen lassen.
Das Volkswagen auch die offene API für #homeassistant zu Gunsten einer „Lösung mit ausgewählten Anbietern“ also auch ein Vendor-Lock gekappt hat, ist bekannt?
#BambuLab hat mal bei 3D-Drucker versucht, andere Software auszusperren.
Das wurde sehr schnell sehr laut.
Community hilft. -
Makerworld is a fucking cancer. #3dprinting #bambuLab
-
Makerworld is a fucking cancer. #3dprinting #bambuLab
-
Ich habe das Pink jetzt doch gegen das schwarze Metallic-Filament ausgetauscht.
Fällt auch noch auf, aber "dezenter" 🤪
Endlich Platz für Lüfter und Zubehör – ich bin begeistert!
#3Dprint #raspberrypi #bambulab #nobufil -
Ich habe das Pink jetzt doch gegen das schwarze Metallic-Filament ausgetauscht.
Fällt auch noch auf, aber "dezenter" 🤪
Endlich Platz für Lüfter und Zubehör – ich bin begeistert!
#3Dprint #raspberrypi #bambulab #nobufil -
OMG just installed https://github.com/maziggy/bambuddy and it is pretty cool!
-
OMG just installed https://github.com/maziggy/bambuddy and it is pretty cool!
-
🖨️ Bambu Lab A2L punta al grande formato senza far lievitare il prezzo: pregi, limiti e a chi conviene davvero. #3DPrinting #BambuLab
🔗 https://www.tomshw.it/hardware/recensione-bambu-lab-a2l-large-format-low-cost
-
Habe mal wieder was gedruckt 🙄
In den Behälter passt eine Dose Energy-Drink. Das passt einfach super zu einem #Pedelec
#3d #3dprinting #BambuLab #MakerWorld #Fahrradalltag -
Habe mal wieder was gedruckt 🙄
In den Behälter passt eine Dose Energy-Drink. Das passt einfach super zu einem #Pedelec
#3d #3dprinting #BambuLab #MakerWorld #Fahrradalltag -
Bambuddy : un gestionnaire libre pour imprimantes Bambu Lab
Bambuddy est une solution de gestion locale, auto-hébergée, open source et comprenant son propre slicer dédiée aux imprimantes 3D Bambu Lab..
https://www.minimachines.net/?p=142108 #bambulab #opensource -
Glad I eeked out the two caps I needed before all hell broke loose in the AMS 2 Pro. I printed them with a 0.2mm nozzle using 0.08mm layers. Also the first time in the eight months with this #BambuLab H2S that I even took the shipping plastic off my smooth plate.
Not quite injection moulded quality, but as close as I'm going to get. Pleased with them and the color is close enough.
Rest of that spool goes in the trash.