#3ddesign — Public Fediverse posts

Springlock (FNAF 4)
Series: Five Nights At Freddy's (FNAF)
3D Models by: Emulatoooor
Genders: Female & Male
Dinner Animatronics
3D Render
Render Image
3D Characters
Animatronics Chicken & Rabbit & Bear
#FNAF #fivenightsatfreddys #Animatronics #Robot #Fangame #3dmodel #3dart #3ddesign #characters #3drender #FNAF4 #Horror #Springlock #scottcawthon

@mntmn okay, before I start pondering how the lid will look/lock in place, I just wanna run this past you so I don't go too far off the rails. 😅

The bigger holes are the same positioning and diameter as the 100mm VESA mount holes.

The small holes line up with the holes in the battery board PCBs.

The slot should(?) be big enough to handle the pass-through to the other enclosure.

The rounded corners should match the main computer enclosure, for aesthetics.

Any thoughts/concerns so far?

Here's the onshape document so far -- https://cad.onshape.com/documents/c90a7d7c275e04a316862928/w/9f8c801748449da557672f66/e/48ab3a2ea61bb8339ec01e7b?renderMode=0&uiState=6a75f6bc4315c6d048cfeef1

#3dDesign #3Dprinting #CAD

#Prototyping an eGPU and ATX PSU enclosure combination 🍶 🎓️️ #onshape #3Ddesign #CAD #STEM

RE: https://mastodon.online/@dlsl/116920061679262213

Colleague let me know there's something similar and it's open-source! "Sweet Home 3D" (https://www.sweethome3d.com/). Haven't given it a spin but looks promising.

#interiordesign #foss #sweethome3d #3ddesign

🎬open_world_firearms The M416 in its rawest form. Precision engineering meets fluid mechanics in this slow-motion cutaway. Observe the gas management through the custom suppressor baffles.
Designed by Open world firearms.
#3DDesign #Engineering #SlowMotion #TacticalTech #Weaponry

Okay, follow up to my #3dDesign #3Dprinting project - https://gladtech.social/@skullvalanche/116816937142474916

I have printed a working prototype, but it's got some issues I wanted to fix, so I've tweaked the design again to try to solve for them.

1. The bracket is slightly too wide, and doesn't nest inside the pedal quite right. Adjusted the width narrower by 4mm.

2. My pedals are hybrid flat/clipless pedals, and they seem to insist on nesting clipless side down, which doesn't sit as well in the bracket as I'd like. Added a little notch for the clipless mechanism.

3. The screw holes were too far apart and only 1 of them was able to screw into the wall stud. adjusted them to be closer together.

Pictures attached are of the V3 prototype (hopefully showing the aforementioned issues).

Screenshots are of the new V4 with adjustments. 🤞

Here's the V4 -- https://cad.onshape.com/documents/35fd751a9e10b9b7ee72812c/w/923e781ec4c72502b1c3679d/e/0a8e287981b6407165f08304

I’m still trying to perfect the Pedal Support part to make it also printable without any supports.

As I was posting this message I just had an idea of how to do it.

https://cad.onshape.com/documents/a61d50ba66179b4c2b0cd8de/w/5289f7f3c91cfc071cc70b4a/e/bc71a9cb9679895d22b65d91

Guess I'll follow up with the revision version when it's ready. 😅

#bikes #3Dprinting #3dDesign

Okay, so I wanted to print a wall-mount for my bike.

Something sorta like https://www.printables.com/model/499062-bike-wall-mount

But that design has a lot of sharp angles and would require a lot of supports and post-printing cleanup.

So I made these for the wheels, which print with 0 supports and 0 cleanup.

https://cad.onshape.com/documents/437e9f13355fb33380c17253/w/d3e998c6803bff4aa19258dc/e/40b2fa2e3a99efd7d7fccba6

#3Dprinting #3dDesign #CAD

#SolveSpace is supremely suited to quickly do some technical drawings. Handed this to our institute's machinist and they were very happy to make me the part 😊

#CAD #3dDesign

I'm growing unashamed to just use TinkerCAD now when I need something quick and simple, which isn't more than a set of geometric shapes... which is a surprisingly amount of stuff.
#3DDesign #TinkerCAD

Sometimes our prints get rather large 😎

#miniatures #miniatyyrit #miniaturegaming #3dprinting #3dprinttaus #anycubic #slaprinting #miniatyyripelit #resinprinting #stlprinting #tabletopgames #printingservice #3dtulostus #digitalhandicraft #digitaalinenkäsityö #miniaturepainting #acrylicpainting #thebotzz #webshop #webstore #workshop #workshopforgames #stl #3dsuunnittelu #3ddesign #titans #largescalemodels #verkkokauppa

A better way to harness the wind ?

Mechanical principle validated by a first physical prototype. Now looking for makers to build and field-test. Collaborative R&D. Make profits from it : referral links and R&D awards.

#WindTurbine #GreenTech #DIY #LowTech #LowCost #3DDesign #SmallWind

3D Metall-Wandrelief „Waldstille“ https://www.kunstplaza.de/shop/floresta-103x80-cm/?utm_source=dlvr.it&utm_medium=mastodon #3DDesign #Wandrelief #Kunst