home.social

Search

4 results for “NotTheLBCGuy”

  1. Not The LBC Guy @NotTheLBCGuy ·

    Bit: 60° vee
    X/Y speed: 300mm/min
    Plunge speed: 286 mm/min (vertical ramp)
    Depth per pass: 0.5mm
    No roughing pass

    These are quite conservative settings, especially on the plunge. Got some downcut bits on order to see if they enable a cleaner roughing pass.

    #cnc #cncmachines #notcncthekink
  2. Not The LBC Guy @[email protected] ·

    Bit: 60° vee
    X/Y speed: 300mm/min
    Plunge speed: 286 mm/min (vertical ramp)
    Depth per pass: 0.5mm
    No roughing pass

    These are quite conservative settings, especially on the plunge. Got some downcut bits on order to see if they enable a cleaner roughing pass. #CNC #CNCMachines #NotCNCTheKink

    #notcncthekink #cncmachines #cnc
  3. Not The LBC Guy @[email protected] ·

    Bit: 60° vee
    X/Y speed: 300mm/min
    Plunge speed: 286 mm/min (vertical ramp)
    Depth per pass: 0.5mm
    No roughing pass

    These are quite conservative settings, especially on the plunge. Got some downcut bits on order to see if they enable a cleaner roughing pass. #CNC #CNCMachines #NotCNCTheKink

    #notcncthekink #cncmachines #cnc
  4. Not The LBC Guy @[email protected] ·

    Bit: 60° vee
    X/Y speed: 300mm/min
    Plunge speed: 286 mm/min (vertical ramp)
    Depth per pass: 0.5mm
    No roughing pass

    These are quite conservative settings, especially on the plunge. Got some downcut bits on order to see if they enable a cleaner roughing pass. #CNC #CNCMachines #NotCNCTheKink

    #cnc #cncmachines #notcncthekink