Search
21 results for “zecuse”
-
Finally finished tying everything and damn was this annoying without a needle!
One 5L6B 5 ply #TurksHead with an addition 2 plies in thinner #paracord going in an inverted #wrap.
A 4 strand #CrownKnot creates a handle secured with #CelticButton knots through the Turk's head. I didn't feel it was secure enough with only 2 strands.
The whole thing easily slides down off the #tumbler and has a VERY tight fit when pressed up.
-
Finally finished tying everything and damn was this annoying without a needle!
One 5L6B 5 ply #TurksHead with an addition 2 plies in thinner #paracord going in an inverted #wrap.
A 4 strand #CrownKnot creates a handle secured with #CelticButton knots through the Turk's head. I didn't feel it was secure enough with only 2 strands.
The whole thing easily slides down off the #tumbler and has a VERY tight fit when pressed up.
-
Finally finished tying everything and damn was this annoying without a needle!
One 5L6B 5 ply #TurksHead with an addition 2 plies in thinner #paracord going in an inverted #wrap.
A 4 strand #CrownKnot creates a handle secured with #CelticButton knots through the Turk's head. I didn't feel it was secure enough with only 2 strands.
The whole thing easily slides down off the #tumbler and has a VERY tight fit when pressed up.
-
Finally finished tying everything and damn was this annoying without a needle!
One 5L6B 5 ply #TurksHead with an addition 2 plies in thinner #paracord going in an inverted #wrap.
A 4 strand #CrownKnot creates a handle secured with #CelticButton knots through the Turk's head. I didn't feel it was secure enough with only 2 strands.
The whole thing easily slides down off the #tumbler and has a VERY tight fit when pressed up.
-
Finally finished tying everything and damn was this annoying without a needle!
One 5L6B 5 ply #TurksHead with an addition 2 plies in thinner #paracord going in an inverted #wrap.
A 4 strand #CrownKnot creates a handle secured with #CelticButton knots through the Turk's head. I didn't feel it was secure enough with only 2 strands.
The whole thing easily slides down off the #tumbler and has a VERY tight fit when pressed up.
-
Finished the #3dprint and inserted 8 heat set inserts (both ends) to be used with M4 screws as pegs. In an attempt to make a 6 bight #TurksHead knot (5 leads), I had accidentally made a 5 bight one (6 leads).
So, I whipped up a quick grid in #Photoshop which conveniently provides a premade #weave #pattern. I only had to rotate it 45°!
Just waiting for the #paracord to come in the mail to make a (probably) 7L6B knot for the tumbler and some sort of handle to hook through 2 of the top bights.
-
I got a tumbler as a gift recently and wanted to make a handle and grip to more easily carry it. This is the first step in that process.
This is an 8 peg #mandrel being #3dprinted on an #ender3pro. The pegs are labeled 2, 3, 4, 6, 2, 6, 4, 3 to act as a guide for tying a 2, 3, 4, or 6 bight #TurksHead #knot. #M4 screws will be used as the pins.
It's ~200mm in height which should allow for as many leads as I'd desire.
-
I got a tumbler as a gift recently and wanted to make a handle and grip to more easily carry it. This is the first step in that process.
This is an 8 peg #mandrel being #3dprinted on an #ender3pro. The pegs are labeled 2, 3, 4, 6, 2, 6, 4, 3 to act as a guide for tying a 2, 3, 4, or 6 bight #TurksHead #knot. #M4 screws will be used as the pins.
It's ~200mm in height which should allow for as many leads as I'd desire.
-
I got a tumbler as a gift recently and wanted to make a handle and grip to more easily carry it. This is the first step in that process.
This is an 8 peg #mandrel being #3dprinted on an #ender3pro. The pegs are labeled 2, 3, 4, 6, 2, 6, 4, 3 to act as a guide for tying a 2, 3, 4, or 6 bight #TurksHead #knot. #M4 screws will be used as the pins.
It's ~200mm in height which should allow for as many leads as I'd desire.
-
I got a tumbler as a gift recently and wanted to make a handle and grip to more easily carry it. This is the first step in that process.
This is an 8 peg #mandrel being #3dprinted on an #ender3pro. The pegs are labeled 2, 3, 4, 6, 2, 6, 4, 3 to act as a guide for tying a 2, 3, 4, or 6 bight #TurksHead #knot. #M4 screws will be used as the pins.
It's ~200mm in height which should allow for as many leads as I'd desire.
-
I got a tumbler as a gift recently and wanted to make a handle and grip to more easily carry it. This is the first step in that process.
This is an 8 peg #mandrel being #3dprinted on an #ender3pro. The pegs are labeled 2, 3, 4, 6, 2, 6, 4, 3 to act as a guide for tying a 2, 3, 4, or 6 bight #TurksHead #knot. #M4 screws will be used as the pins.
It's ~200mm in height which should allow for as many leads as I'd desire.
-
I've had to take my laptop home for some work and got tired of awkwardly carrying everything along with a lunchbox while trying to navigate through doors and my pocket for car keys.
Since I had some #paracord lying around, I looked up what kind of #knots I could use to temporarily bundle everything together.
This starts out as a simple single lashing (#ABoK 2076), then a diamond pattern lashing (ABoK 2087), and finally 3 parallel loops (ABoK1077) for a comfortable wrist handle.
-
I've had to take my laptop home for some work and got tired of awkwardly carrying everything along with a lunchbox while trying to navigate through doors and my pocket for car keys.
Since I had some #paracord lying around, I looked up what kind of #knots I could use to temporarily bundle everything together.
This starts out as a simple single lashing (#ABoK 2076), then a diamond pattern lashing (ABoK 2087), and finally 3 parallel loops (ABoK1077) for a comfortable wrist handle.
-
I've had to take my laptop home for some work and got tired of awkwardly carrying everything along with a lunchbox while trying to navigate through doors and my pocket for car keys.
Since I had some #paracord lying around, I looked up what kind of #knots I could use to temporarily bundle everything together.
This starts out as a simple single lashing (#ABoK 2076), then a diamond pattern lashing (ABoK 2087), and finally 3 parallel loops (ABoK1077) for a comfortable wrist handle.
-
I've had to take my laptop home for some work and got tired of awkwardly carrying everything along with a lunchbox while trying to navigate through doors and my pocket for car keys.
Since I had some #paracord lying around, I looked up what kind of #knots I could use to temporarily bundle everything together.
This starts out as a simple single lashing (#ABoK 2076), then a diamond pattern lashing (ABoK 2087), and finally 3 parallel loops (ABoK1077) for a comfortable wrist handle.
-
@Jeremyinthebluehouse Looks like it's not on right now. I'm pretty sure all ABL devices have a retractable probe that extends when it does its thing. If it didn't, the touch device could pose a possible problem when printing if it was the same level as the nozzle.
#CRTouch in particular will extend 6mm.
https://all3dp.com/2/creality-cr-touch-simply-explained/#:~:text=The%20CR%20Touch's%20probe%20can,higher%20up%20on%20the%20printhead.Note: I don't have an ABL device for my #Ender3Pro.
-
Un concello menos, #Burela en #Lugo, gracias a Diego Rego (@zeuser66).
Ainda quedan 34 #concellos en toda #Galicia onde non temos localizado ningún #reloxodesol.
-
Un concello menos, #Burela en #Lugo, gracias a Diego Rego (@zeuser66).
Ainda quedan 34 #concellos en toda #Galicia onde non temos localizado ningún #reloxodesol.
-
Una buona notizia che però dovrebbe farci riflettere sul significato stesso della parola indipendenza.
E soprattutto i ravvedimenti (o presunti tali) non scaturiscono per nulla dalle stesse motivazioni.
-
Una buona notizia che però dovrebbe farci riflettere sul significato stesso della parola indipendenza.
E soprattutto i ravvedimenti (o presunti tali) non scaturiscono per nulla dalle stesse motivazioni.
-
Siamo davvero a un passo dalla Cina. Quante libertà dovremo ancora cedere prima di smettere di accettare a testa bassa e svegliarci da questo torpore?
Lasciare in mano internet agli analfabeti digitali al governo e alla commissione europea ne decreterà la fine.